KATEGORIE
3225 Kč
cena s DPH
MikroTik wAP 60G AP
RBwAPG-60ad je naprosto revoluční novinka v MikroTik sortimentu, která osloví každého, kdo vytváří spoje na krátké vzdálenosti. RBwAPG-60ad je kompletní bezlicenční spoj v 60GHz pásmu pracující se standardem 802.11ad, který v reálném provozu umožňuje propustnost až 1000Mbps Full Duplex na vzdálenost až 100m. RouterBoard je jako vždy vybaven velmi oblíbeným operačním systémem RouterOS s L3 licencí. Pro upgrade jedné z jednotek na AP je potřeba dokoupit pouze L4 licenci.
RBwAPG-60ad disponuje 1x Gigabitovým Ethernetem s podporou PoE a napájecím DC jackem. Napájení zařízení lze řešit přes aktivní (802.3af/at) i pasivní (12 až 57V DC) PoE nebo DC konektor s rozsahem 12 až 57V DC. Maximální spotřeba zařízení je pouhých 5W!
Instalace zařízení je velmi jednoduchá a díky 60° integrované anténě jej lze nainstalovat na zeď / stožár nebo přímo za okno pomocí přiloženého plastového podstavce. wAP 60G AP s L4 licencí podporuje až 8 připojených klientů na vzdálenost 100m+
Specifikace:
Product code wAP 60G AP
CPU IPQ-4019 716 MHz
CPU core count 4
Size of RAM 256 MB
10/100/1000 Ethernet ports 1
Wireless Built-in 60 GHz 802.11ad
Antenna beam width Phase array 60° beamforming
PoE in Yes
Supported input voltage 12 V - 57 V (802.3af/at)
Dimensions 185 x 85 x 30 mm
Operating temperature -40 C .. +70 C
License level 4
Operating System RouterOS
Max Power consumption 5 W
Obsah balení
Zařízení s L4 licencí
Napájecí adaptér 24V / 0.38A
Gigabitový POE injektor
(2) Stahovací páska
Podstavec na stůl
Montážní kit na zeď, šroubky, imbus
DATASHEET
Užitečné odkazy:
Diagnostika vadné jednotky
Jak se bránit ESD
veškeré informace o produktech společnosti MikroTik
aktuální verze RouterOS ke stažení
aktuální verze WinBoxu
výpočet parametrů bezdrátového spoje
2795 Kč
cena s DPH
Switch USW-FLEX UniFi flex značky Ubiquiti Networks je 5portový venkovní Gigabitový switch umožňující PoE-In a PoE-Out na 4 portech. Výstupní porty zvládají aktivní napájení typu 802.3af, což dává celkově 15,4 W na každém portu.
6243 Kč
cena s DPH
Moderní, elegantní průmyslový design, robustní řešení a vysoký výkon - to je U Fiber Loco, CPE jednotka pro GPON řešení.
Informace o stavu zařízení
Oproti verzi UF-NANO u této jednotky chybí informační LED displej, namísto toho je vše potřebné zobraze
50981 Kč
cena s DPH
Cisco switch CBS350-48FP-4X-EU
Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci.
Stránky produktu: CBS350-48FP-4X-EU
Quick start guide: Quick start guide
Switching capacity and forwarding rate (All switches are wire speed and nonblocking) Capacity in Millions of Packets per Second (mpps) (64-byte packets) 130,94
Switching Capacity in Gigabits per Second (Gbps) 176
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4,094 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols.
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets
Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for classless interdomain routing
RIP v2 Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Stacking Hardware stacking Up to 4 units in a stack. Up to 200 ports managed as a single system with hardware failover
High availability Fast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack
Plug-and-play stacking configuration/management Active/standby for resilient stack control
Autonumbering
Hot swap of units in stack
Ring and chain stacking options, auto stacking port speed, flexible stacking port options
High-speed stack interconnects Cost-effective high-speed 10G fiber interfaces.
Security ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers.
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing.
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This
823 Kč
cena s DPH
Ubiquiti POE-54V-80W; 2portový PoE adaptér (injektor) pro napájení všech zařízení, které v sobě mají zabudovaný PoE extraktor a podporují napětí DC 54 V. Ideální např. pro napájení jednotek od Ubiquiti nebo Mi...
16571 Kč
cena s DPH
POLY Studio USB Soundbar 120-deg 4k Camera
4726 Kč
cena s DPH
LOEWE Wall Mount Satellite Speaker Chrsi www.mader.cz
1432 Kč
cena s DPH
Rozbočovač MST USB3.2 Gen2 Type-C (DP Alt-Mode) na DisplayPort + HDMI 4K60Hz M/F CSV-1552 je rozbočovač MST USB3.2 Gen2 Type-C(DP™1.4 Alt-Mode) na DisplayPort™ + HDMI™ 4K60Hz M/F . Tento rozbočovač USB-C MST je navrhnutý tak, aby uspokojil vaše najvšestrannejšie požiadavky na pripojenie, ako je mobilný telefón, tablet, notebook atď. s výstupom USB-C, ktorý podporuje režim DP™ Alt-Mode. Dodajte svojmu telefónu, ultrabooku viac displejov. Telefóny, ultrabooky a notebooky sú čoraz výkonnejšie a fyzicky menšie. S jedným USB3.2 Gen2 môžete teraz ovládať jednu obrazovku Displayport™ súčasne s HDMI™2.0 pri frekvencii 4K60 Hz alebo jeden displej DP™ pri frekvencii 8K30 Hz v režime MST (Windows). Všetko, čo potrebuje, je voľný USB3.2 Gen2 s režimom DP™ Alt-Mode na telefóne, notebooku alebo ultrabooku na pripojenie k rozbočovaču MST a poskytne vám jedinečné možnosti pripojenia pre dva displeje s frekvenciou 4K60 Hz. Nastavenie je ľahké a jednoduché za predpokladu, že váš systém túto funkciu podporuje. Podpora dvoch displejov (DP+HDMI™) 3840 x 2160 @ 60Hz Podpora HDCP2.2 a 3D Podpora režimu SST v systéme MAC OS Podpora režimu MST v systéme Windows TECHNICKÉ ŠPECIFIKÁCIE podpora operačného systému Windows10, Mac OS V krabici CSV-1552, rozbočovač MST USB3.2 Gen2 Type-C (DP Alt-Mode) na DisplayPort + HDMI 4K60Hz M/F dostupné rozhrania Vstup: USB3.2 samce typu C 1. generácie Výstup : 1x DisplayPort™ samica 1x HDMI™ samica veľkosť škatule 7.3 x 3.5 x 25 cm / 2.87 x 1.38 x 9.84" veľkosť zariadenia 6.2 x 5.9 x 1.52 cm / 2.44 x 2.32 x 0.6" celková dĺžka Zariadenie 20 cm/ 7.87" hmotnosť škatule 34 gr / 1.2 oz hmotnosť zariadenia 48 gr / 1.69 oz hmotnosť tašky LDPE 5 gr / 0.17 oz celková hmotnosť 87 gr / 3.06 oz . V prípade technických otázok môžete kontaktovať oficiálnu podporu výrobcu Club 3D na emaile: support@club-3d.com. Podpora funguje prevažne v angličtine, ale možno napísať otázku aj v slovenčine a výrobca si s tým poradí. Výrobca odpovie do 24 hodín. Je možné tiež navštíviť diskusiu na odkaze: https://insights.club-3d.com/. Kde tiež môžete nájsť užitočné informácie na použitie výrobkov Club 3D.
2626 Kč
cena s DPH
QNAP QXG-5G1T-111C
Jednoportová, čtyřrychlostní 5 GbE síťová rozšiřující karta pro PC/NAS
Rozšiřující síťová karta 5 GbE poskytuje rychlosti až 5 Gb/s. Přenosovou rychlost ve svém síťovém prostředí můžete snadno vylepšit pomocí stávajících kabelů.
Stránky produktu: https://www.qnap.com/cs-cz/product/nic_pc
Seznam kompatibility QNAP
Technické specifikace
Řadič
Marvell AQtion AQC111C
Přenosové rychlosti
5 Gb/s; 2,5 Gb/s; 1 Gb/s; 100 Mb/s
Rozhraní
PCIe Gen 3.0 x1
Podporované operační systémy
QTS; Windows (je nutný ovladač); Linux (je nutný ovladač)
Podporované QNAP NAS
Modely se sloty PCIe (požadován je 1 volný slot)
Držák
Předinstalovaný nízkoprofilový držák;
specializované držáky s úplnou výškou (pro vybraná zařízení QNAP NAS) jsou obsaženy v balení
Port a kabel
RJ-45; doporučujeme kabel kategorie 5e a vyšší
978 Kč
cena s DPH
Vlnová délka 1310nm +1550nm
Dynamický rozsah 28/26dB
Testovací rozsah 1,2 až 90km
Multifunkční zařízení:
1) Auto OTDR
2) Expert OTDR
3) Event Map
4) Optical Power Meter
5) Optical Light Source
6) Insertion Loss
7) Visual Fault Locator
8) Rj45
208 Kč
cena s DPH
MacLean WKT RJ45 8P8C 5E LINK 100 PCS (MCTV-663 KPL)