KATEGORIE
Zpěz k nákupu
Enlaps Tikee Befestigungskit
Enlaps Tikee Befestigungskit
1169 Kč
966 Kč bez DPH
Dostupnost: Skladem, dodání 2-4 dní
Part no.: 1000014789
Kód produktu: 122590886
Výrobce: Enlaps
Popis produktu
Délka (cm): 19
Šířka (cm): 17
Výška (cm): 3,5
Hmotnost (g): 400
Enlaps Tikee 3 Pro+ mounting kit
Mounting elements that make installing your Tikee camera easier.
Multiply your mounting options with this kit.
Contents:
4 plugs UX 6x35
4 washers M4
4 wood screws M4x40
1 spirit level
2 metal rings with a maximum diameter of 350 mm
2 rubber strips, thickness 2 mm, length 1099 mm, width 20 mm
Notes:
Dowels and screws allow the arm to be fixed in concrete and generally in hollow or solid walls. This requires a drill with a 6 mm diameter drill bit (not supplied).
The screws also allow fixing to wooden structures. The screws are Pozidriv screws, so a Phillips or Pozi screwdriver is required (not supplied).
The metal rings are adjustable and are used to hold the arm on round, rectangular, triangular structures, on any polygon within a maximum circumference of 1099 mm or a diameter of 350 mm. They can be tightened with a flat or Phillips screwdriver or a 7 mm spanner. The excess length can then be cut off with pliers. The rubber bands are intended to protect the support on which the clamps are placed. They can also be cut to length with a cutter/scissors...(not included)
Popis produktu
Typ: Příslušenství speciální fotografieDélka (cm): 19
Šířka (cm): 17
Výška (cm): 3,5
Hmotnost (g): 400
Enlaps Tikee 3 Pro+ mounting kit
Mounting elements that make installing your Tikee camera easier.
Multiply your mounting options with this kit.
Contents:
4 plugs UX 6x35
4 washers M4
4 wood screws M4x40
1 spirit level
2 metal rings with a maximum diameter of 350 mm
2 rubber strips, thickness 2 mm, length 1099 mm, width 20 mm
Notes:
Dowels and screws allow the arm to be fixed in concrete and generally in hollow or solid walls. This requires a drill with a 6 mm diameter drill bit (not supplied).
The screws also allow fixing to wooden structures. The screws are Pozidriv screws, so a Phillips or Pozi screwdriver is required (not supplied).
The metal rings are adjustable and are used to hold the arm on round, rectangular, triangular structures, on any polygon within a maximum circumference of 1099 mm or a diameter of 350 mm. They can be tightened with a flat or Phillips screwdriver or a 7 mm spanner. The excess length can then be cut off with pliers. The rubber bands are intended to protect the support on which the clamps are placed. They can also be cut to length with a cutter/scissors...(not included)