KATEGORIE
Zpěz k nákupu
HPE Aruba Networking CX 6000 24G 4SFP Switch R8N88A RENEW
HPE Aruba Networking CX 6000 24G 4SFP Switch R8N88A RENEW
10002 Kč
8266 Kč bez DPH
Dostupnost: Ano, centrál. sklad
Part no.: R8N88AR#ABB
Kód produktu: 115825576
Výrobce: Hewlett Packard Enterprise
Popis produktu
HPE Aruba Networking 6000 Switch Specifications
Specification
6000 24G 4SFP Switch (R8N88A)
Description
24x ports 10/100/1000BASE-T 4x 1G SFP ports 1x USB-C Console Port 1x USB Type-A Host port
Power supplies
Fixed power supply
Fans
Fixed fans
Physical dimensions (H x W x D)
4.39 cm x 44.2 cm x 20.12 cm (1.73" x 17.4" x 7.92")
Weight
2.62 kg (5.78 lbs)
CPU
Dual Core ARM Cortex A9 @ 1016 MHz
Memory and Flash
4 GB DDR3, 16 GB eMMC
Packet Buffer
12.38MB (4.5MB Ingress / 7.875MB Egress)
Switching Capacity
56 Gbps
Throughput Capacity
41.6 Mpps
Average Latency (LIFO-64-bytes packets)
1 Gbps: 1.5 µSec
Switched Virtual Interfaces (dual stack)
16
IPv4 Host Table (ARP)
1,024
IPv6 Host Table (ND)
512
IPv4 Unicast Routes
512
IPv6 Unicast Routes
512
MAC Table Capacity
8,192
IGMP Groups
512
MLD Groups
512
IPv4/IPv6/MAC ACL Entries (ingress)
256 / 128 / 256
Operating Temperature
32°F to 113°F (0°C to 45°C) up to 5000 ft (1.5 km) Derate -1°C for every 1000 ft (305 m) from 5000 ft to 10000 ft
Operating Relative Humidity
15% to 95% at 104°F (40°C), non-condensing
Non-Operating Temperature
-40°F to 158°F (-40°C to 70°C) up to 15000 ft (4.6 km)
Non-Operating Storage Relative Humidity
15% to 90% at 149°F (65°C), non-condensing
Max Operating Altitude
10,000 feet (3 km)
Max Non-Operating Altitude
15,000 feet (4.6 km)
Acoustic
Sound Power, LWAd = 3.9 Bel Sound Pressure, LpAm (Bystander) = 20.9 dB
Primary Airflow
Side-to-side
Frequency
50 / 60 Hz
AC Voltage
100-127 VAC / 200-240 VAC
Current
0.6 A / 0.4 A
Power Consumption (230 VAC)
Idle: 15.4W Max Power (w/o PoE): 33W
Safety
IEC / EN 62368-1: 2014 UL 62368-1: 2014, 2nd Ed., CSA C22.2 No. 62368-1:14, 2nd Ed.
Emissions
VCCI-CISPR 32, Class A CNS 15936, Class A FCC CFR 47 Part 15, Class A; EN 55032:2015 / A11:2020 / CISPR-32, Class A ICES-003 Issue 7: 2020, Class A AS/NZS CISPR 32: 2015, Class A
Lasers
IEC / EN 60825-1:2014, Class 1 (For accessories - Optical Transceivers only)
Immunity
CISPR 35: 2016 EN 55035:2017 / A11:2020 IEC 61000-4-2 (ESD) IEC 61000-4-3 (Radiated) IEC 61000-4-4 (EFT/Burst) IEC 61000-4-5 (Surge) IEC 61000-
HPE Aruba Networking CX 6000 Switch Series
The HPE Aruba Networking CX 6000 Switch Series is a modern family of entry-level access switches ideal for branch offices, midsize businesses, and small enterprises. Optimized for reliable, simple, and secure access, the CX 6000 Switch series provides a convenient and cost-effective wired access solution for networks supporting IoT, mobile, and cloud applications.
The CX 6000 Switch series is based on the HPE Aruba Networking ASIC architecture with the programmable AOS-CX operating system used across the entire HPE Aruba Networking CX portfolio for a more consistent, more efficient operator experience. This fully managed series has convenient built-in uplinks with up to 740W of PoE+ to support IoT devices such as security cameras and wireless APs. A compact and fanless model is ideal for use in quiet, small workspaces.
The HPE Aruba Networking CX 6000 Switch Series is easy to deploy and use with flexible management choices that include Web GUI, CLI, cloud-based and on-premises HPE Aruba Networking Central management, so you can choose the best fit for your business and network environment.
Delivering Layer 2 capabilities with enhanced access security, traffic prioritization, and IPv6 support, the CX 6000 also simplifies ownership and brings peace of mind with switch software embedded with no subscription required to enable and a Limited Lifetime Warranty.
Key Features
Enterprise-class Layer 2 connectivity with support for ACLs, robust QoS, and static routing
Convenient built-in 1GbE uplinks and up to 740W of Class 4 PoE for support of IoT devices
Compact and fanless 12 port model for quiet deployment
Management flexibility with support for HPE Aruba Networking Central, easy-to-use Web GUI, CLI, and HPE Aruba Networking NetEdit
Simple deployment with Zero Touch Provisioning
Software defined ready with REST APIs
Simplify adds, moves, and changes with colorless ports
Standard Features
Product Differentiators
AOS-CX - A modern software system
The HPE Aruba Networking CX 6000 Switch Series is based on AOS-CX, a modern, database-driven operating system built on a modular Linux architecture. Benefits include:
Easy access to all network configuration state information
REST APIs for fine-grained programmability of network tasks
A micro-services architecture enabling full integration with other workflow systems and services
All software processes communicate with the database rather than each other, ensuring near real-time state and resiliency
HPE Aruba Networking ASICs - Programmable innovation
Based on over 30 years of continuous investment, HPE Aruba Networking s ASICs provide innovative software feature advancements, unparalleled performance, and deep visibility. The CX 6000 Switch Series uses this ASIC architecture for optimized performance and capacity.
Access Layer Performance
Up to 104 Gbps non-blocking bandwidth and up to 77.3 Mpps forwarding
Selectable queue configurations for optimized performance
Management flexibility with cloud-based and on-premises options, CLI, and Web GUI
Simplify Adds, Moves and Changes
Reduce manual IT tasks with colorless ports using local user roles and local-MAC-Authentication (LMA). Colorless ports automatically apply required roles/policies instead of static VLAN mapping.
Cost-effective enterprise-class access
Five fixed 1U models supporting 24 or 48 IEEE 802.3 1GbE access ports, with built-in uplink SFP ports
PoE models supporting up to 370W (24 port) and 740W (48 port) IEEE 802.3at Class 4 PoE
Compact fanless 12 port model with four uplinks and 139W PoE support
Supports Energy Efficient Ethernet IEEE 802.3az, Auto-MDIX, Jumbo frames, and packet storm protection
Resiliency and Availability
Uni-directional Link Detection (UDLD) to prevent STP loops
IEEE 802.3ad LACP with up to 8 LAGs, each with up to 8 links
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) and legacy STP support
SmartLink link redundancy
Quality of Service (QoS) features
Strict priority queuing
Traffic prioritization (IEEE 802.1p)
Class of Service (CoS) based on IP address, ToS, protocol, TCP/UDP port, source port, DiffServ
Rate limiting with per-port ingress and queue minimums
Large buffers for congestion management
Simplified Configuration and Management
Multiple management interfaces supported including Web GUI, CLI, cloud-based HPE Aruba Networking Central, REST API, and NetEdit automation tool.
Layer 2 and Layer 3 Features
The switch supports extensive Layer 2 VLAN, spanning tree protocols, port mirroring, multicast, and Layer 3 static routing, dual IPv4/IPv6 stack, and multicast protocols.
Security Features
Integrated TPM for platform integrity
IPv4 and IPv6 ACLs
RADIUS, TACACS+ authentication
IEEE 802.1X, MAC-based authentication, and multiple authentication schemes per port
Secure management access with SSHv2, SSL, SNMPv3
Control Plane Policing, DHCP snooping, ARP protection, port security, MAC pinning, and more
Convergence and PoE
LLDP-MED for automatic device configuration
Multiple PoE allocation methods for efficient power management
Auto VLAN configuration for voice VLANs
Additional Information
Supports green initiatives such as RoHS and WEEE.
Support and Warranty
Limited Lifetime Warranty. For warranty and support details, visit HPE Aruba Networking Support Services . So
Popis produktu
HPE Aruba Networking 6000 Switch Specifications
Specification
6000 24G 4SFP Switch (R8N88A)
Description
24x ports 10/100/1000BASE-T 4x 1G SFP ports 1x USB-C Console Port 1x USB Type-A Host port
Power supplies
Fixed power supply
Fans
Fixed fans
Physical dimensions (H x W x D)
4.39 cm x 44.2 cm x 20.12 cm (1.73" x 17.4" x 7.92")
Weight
2.62 kg (5.78 lbs)
CPU
Dual Core ARM Cortex A9 @ 1016 MHz
Memory and Flash
4 GB DDR3, 16 GB eMMC
Packet Buffer
12.38MB (4.5MB Ingress / 7.875MB Egress)
Switching Capacity
56 Gbps
Throughput Capacity
41.6 Mpps
Average Latency (LIFO-64-bytes packets)
1 Gbps: 1.5 µSec
Switched Virtual Interfaces (dual stack)
16
IPv4 Host Table (ARP)
1,024
IPv6 Host Table (ND)
512
IPv4 Unicast Routes
512
IPv6 Unicast Routes
512
MAC Table Capacity
8,192
IGMP Groups
512
MLD Groups
512
IPv4/IPv6/MAC ACL Entries (ingress)
256 / 128 / 256
Operating Temperature
32°F to 113°F (0°C to 45°C) up to 5000 ft (1.5 km) Derate -1°C for every 1000 ft (305 m) from 5000 ft to 10000 ft
Operating Relative Humidity
15% to 95% at 104°F (40°C), non-condensing
Non-Operating Temperature
-40°F to 158°F (-40°C to 70°C) up to 15000 ft (4.6 km)
Non-Operating Storage Relative Humidity
15% to 90% at 149°F (65°C), non-condensing
Max Operating Altitude
10,000 feet (3 km)
Max Non-Operating Altitude
15,000 feet (4.6 km)
Acoustic
Sound Power, LWAd = 3.9 Bel Sound Pressure, LpAm (Bystander) = 20.9 dB
Primary Airflow
Side-to-side
Frequency
50 / 60 Hz
AC Voltage
100-127 VAC / 200-240 VAC
Current
0.6 A / 0.4 A
Power Consumption (230 VAC)
Idle: 15.4W Max Power (w/o PoE): 33W
Safety
IEC / EN 62368-1: 2014 UL 62368-1: 2014, 2nd Ed., CSA C22.2 No. 62368-1:14, 2nd Ed.
Emissions
VCCI-CISPR 32, Class A CNS 15936, Class A FCC CFR 47 Part 15, Class A; EN 55032:2015 / A11:2020 / CISPR-32, Class A ICES-003 Issue 7: 2020, Class A AS/NZS CISPR 32: 2015, Class A
Lasers
IEC / EN 60825-1:2014, Class 1 (For accessories - Optical Transceivers only)
Immunity
CISPR 35: 2016 EN 55035:2017 / A11:2020 IEC 61000-4-2 (ESD) IEC 61000-4-3 (Radiated) IEC 61000-4-4 (EFT/Burst) IEC 61000-4-5 (Surge) IEC 61000-
HPE Aruba Networking CX 6000 Switch Series
The HPE Aruba Networking CX 6000 Switch Series is a modern family of entry-level access switches ideal for branch offices, midsize businesses, and small enterprises. Optimized for reliable, simple, and secure access, the CX 6000 Switch series provides a convenient and cost-effective wired access solution for networks supporting IoT, mobile, and cloud applications.
The CX 6000 Switch series is based on the HPE Aruba Networking ASIC architecture with the programmable AOS-CX operating system used across the entire HPE Aruba Networking CX portfolio for a more consistent, more efficient operator experience. This fully managed series has convenient built-in uplinks with up to 740W of PoE+ to support IoT devices such as security cameras and wireless APs. A compact and fanless model is ideal for use in quiet, small workspaces.
The HPE Aruba Networking CX 6000 Switch Series is easy to deploy and use with flexible management choices that include Web GUI, CLI, cloud-based and on-premises HPE Aruba Networking Central management, so you can choose the best fit for your business and network environment.
Delivering Layer 2 capabilities with enhanced access security, traffic prioritization, and IPv6 support, the CX 6000 also simplifies ownership and brings peace of mind with switch software embedded with no subscription required to enable and a Limited Lifetime Warranty.
Key Features
Enterprise-class Layer 2 connectivity with support for ACLs, robust QoS, and static routing
Convenient built-in 1GbE uplinks and up to 740W of Class 4 PoE for support of IoT devices
Compact and fanless 12 port model for quiet deployment
Management flexibility with support for HPE Aruba Networking Central, easy-to-use Web GUI, CLI, and HPE Aruba Networking NetEdit
Simple deployment with Zero Touch Provisioning
Software defined ready with REST APIs
Simplify adds, moves, and changes with colorless ports
Standard Features
Product Differentiators
AOS-CX - A modern software system
The HPE Aruba Networking CX 6000 Switch Series is based on AOS-CX, a modern, database-driven operating system built on a modular Linux architecture. Benefits include:
Easy access to all network configuration state information
REST APIs for fine-grained programmability of network tasks
A micro-services architecture enabling full integration with other workflow systems and services
All software processes communicate with the database rather than each other, ensuring near real-time state and resiliency
HPE Aruba Networking ASICs - Programmable innovation
Based on over 30 years of continuous investment, HPE Aruba Networking s ASICs provide innovative software feature advancements, unparalleled performance, and deep visibility. The CX 6000 Switch Series uses this ASIC architecture for optimized performance and capacity.
Access Layer Performance
Up to 104 Gbps non-blocking bandwidth and up to 77.3 Mpps forwarding
Selectable queue configurations for optimized performance
Management flexibility with cloud-based and on-premises options, CLI, and Web GUI
Simplify Adds, Moves and Changes
Reduce manual IT tasks with colorless ports using local user roles and local-MAC-Authentication (LMA). Colorless ports automatically apply required roles/policies instead of static VLAN mapping.
Cost-effective enterprise-class access
Five fixed 1U models supporting 24 or 48 IEEE 802.3 1GbE access ports, with built-in uplink SFP ports
PoE models supporting up to 370W (24 port) and 740W (48 port) IEEE 802.3at Class 4 PoE
Compact fanless 12 port model with four uplinks and 139W PoE support
Supports Energy Efficient Ethernet IEEE 802.3az, Auto-MDIX, Jumbo frames, and packet storm protection
Resiliency and Availability
Uni-directional Link Detection (UDLD) to prevent STP loops
IEEE 802.3ad LACP with up to 8 LAGs, each with up to 8 links
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) and legacy STP support
SmartLink link redundancy
Quality of Service (QoS) features
Strict priority queuing
Traffic prioritization (IEEE 802.1p)
Class of Service (CoS) based on IP address, ToS, protocol, TCP/UDP port, source port, DiffServ
Rate limiting with per-port ingress and queue minimums
Large buffers for congestion management
Simplified Configuration and Management
Multiple management interfaces supported including Web GUI, CLI, cloud-based HPE Aruba Networking Central, REST API, and NetEdit automation tool.
Layer 2 and Layer 3 Features
The switch supports extensive Layer 2 VLAN, spanning tree protocols, port mirroring, multicast, and Layer 3 static routing, dual IPv4/IPv6 stack, and multicast protocols.
Security Features
Integrated TPM for platform integrity
IPv4 and IPv6 ACLs
RADIUS, TACACS+ authentication
IEEE 802.1X, MAC-based authentication, and multiple authentication schemes per port
Secure management access with SSHv2, SSL, SNMPv3
Control Plane Policing, DHCP snooping, ARP protection, port security, MAC pinning, and more
Convergence and PoE
LLDP-MED for automatic device configuration
Multiple PoE allocation methods for efficient power management
Auto VLAN configuration for voice VLANs
Additional Information
Supports green initiatives such as RoHS and WEEE.
Support and Warranty
Limited Lifetime Warranty. For warranty and support details, visit HPE Aruba Networking Support Services . So