KATEGORIE
Kategorie: Přepínače
3054 Kč
cena s DPH
ETHERNET PORT CONFIGURATION
8 Gigabit ports
PLUG-AND-PLAY
Simple set up with no software to install or configuration needed and zero maintenance
FULL PERFORMANCE
Non-blocking switching architecture for maximum throughput at wire speed
PHYSICAL SPE
2921 Kč
cena s DPH
TP-Link OMADA switch SG2206MP
Omada Access 6portový gigabitový switch se 4 porty PoE+
5× gigabitových RJ45 portů (4× PoE+) a 1× gigabitový SFP slot
Celkový PoE rozpočet 63 W, až 30 W na každý PoE+ port*
Centralizovaná cloudová správa přes web nebo aplikaci Omada†
Samostatná správa přes web, CLI, SNMP a RMON
Statické směrování pomáhá efektivněji směrovat interní provoz
VLAN, ACL, QoS a IGMP Snooping
Odolné kovové pouzdro a provedení pro umístění na stůl nebo montáž na stěnu
Stránky produktu: https://www.omadanetworks.com/cz/business-networking/omada-switch-access/sg2206mp
Technické specifikace
HARDWARE FEATURES
Interface • 4× 10/100/1000 Mbps PoE+ RJ45 Ports
• 1× 10/100/1000 Mbps RJ45 Port
• 1× Gigabit SFP Slot
Physical Security Lock ?
Power Supply 53.5 VDC / 1.31 A
PoE Ports (RJ45) • Standard: 802.3at/af compliant
• PoE+ Ports: 4 Ports
• PoE Power Budget: 63 W*
• Fast PoE
• Perpetual PoE
Dimensions ( W x D x H ) 6.2 × 4.0 × 1.0 in (158 × 100.7 × 25.4 mm)
Mounting Desktop / Wall Mounting
Max. Power Consumption 73.7 W (110V/60Hz) (with 63 W PD connected)
Max. Heat Dissipation 250.4 BTU/hr (110V/60Hz) (with 63 W PD connected)
PERFORMANCE
Switching Capacity 12 Gbps
Packet Forwarding Rate 8.93 Mpps
MAC Address Table 8K
Packet Buffer Memory 4.1 Mbit
Jumbo Frame 9 KB
SOFTWARE FEATURES
Quality of Service • 802.1p CoS/DSCP priority
• 8 priority queues
• Priority Schedule Mode
- SP (Strict Priority)
- WRR (Weighted Round Robin)
• Queue Weight Config
• Bandwidth Control
- Port/Flow based Rating Limit
• Storm Control
- Multiple Control Modes(kbps/ratio)
- Broadcast/Multicast/Unknown-Unicast Control
L2 and L2+ Features • 16 IP Interfaces: Support IPv4/IPv6 Interface
• Static Routing: 32 IPv4/IPv6 Static Routes
• DHCP Server
• DHCP Relay
- DHCP Interface Relay
- DHCP VLAN Relay
• DHCP L2 Relay
• Static ARP
• Proxy ARP
• Gratuitous ARP
• Link Aggregation
• Spanning Tree Protocol
• Loopback Detection
• 802.3x Flow Control
• Mirroring
• Device Link Detect Protocol (DLDP)
• 802.1ab LLDP/ LLDP-MED
• Spanning Tree
- STP (802.1d)
- RSTP (802.1w)
- MSTP (802.1s)
- STP Security: TC Protect, BPDU Filter/Protect, Root Protect
L2 Multicast • 511 IPv4, IPv6 shared multicast groups
• IGMP Snooping
• Multicast VLAN Registration (MVR)
• Multicast Filtering
• Limited IP Multicast (256 profiles and 16 entries per profile)
Advanced Features • Automatic Device Discovery†
• Batch Configuration†
• Batch Firmware Upgrading†
• Intelligent Network Monitoring†
• Abnormal Event Warnings†
• Unified Configuration†
• Reboot Schedule†
VLAN • VLAN Group
- Max. 4K VLAN Groups
• 802.1Q tag VLAN
• MAC VLAN: 16 Entries
• Protocol VLAN
• GVRP
• Voice VLAN
Access Control List • Support up to 230 entries
• Time-Range
• Time-based ACL
• MAC ACL
• IP ACL
• IPv6 ACL
• Combined ACL
• Rule Operation: Permit/Deny
• Policy Action
- Mirroring
- Redirect
- Rate Limit
- QoS Remark
• ACL Rules Binding
- Port Binding
- VLAN Binding
Security • IP-MAC-Port Binding
• AAA
• 802.1X
- Port-based authentication
- MAC (Host) based authentication
- Authentication Method includes PAP/EAP-MD5
- MAB
- Guest VLAN
- Support Radius authentication and accountability
• IP/IPv6-MAC Binding
- 512 Binding Entries
- DHCP Snooping
- DHCPv6 Snooping
- ARP Inspection
- ND Detection
- ND Snooping
• IP Source Guard
- 253 Entries
- Source IP+Source MAC
• IPv6 Source Guard
- 183 Entries
- Source IPv6 Address+Source MAC
• DoS Defend
• DHCP Filter
• Static/Dynamic/Permanent Port Security
- Up to 64 MAC addresses per port
• Broadcast/Multicast/Unicast Storm Control
- kbps/ratio control mode
• Port Isolation
• Secure web management through HTTPS with SSLv3/TLS 1.2
• Secure Command Line Interface (CLI) management with SSHv1/SSHv2
• IP/Port/MAC-based access control
IPv6 • IPv6 Static Routing and ACL
• IPv6 Dual IPv4/IPv6
• IPv6 Interface
• Multicast Listener Discovery (MLD) Snooping
• IPv6 neighbor discovery (ND)
• Path maximum transmission unit (MTU) discovery
• Internet Control Message Protocol (ICMP) version 6
• TCPv6/UDPv6
• IPv6 applications
- DHCPv6 Client
- Ping6
- Tracert6
- Telnet(v6)
- IPv6 SNMP
- IPv6 SSH
- IPv6 SSL
- Http/Https
- IPv6 TFTP
MIBs • MIB II (RFC1213)
• Bridge MIB (RFC1493)
• P/Q-Bridge MIB (RFC2674)
• Radius Accounting Client MIB (RFC2620)
• Radius Authentication Client MIB (RFC2618)
• Remote Ping, Traceroute MIB (RFC2925)
• Support TP-Link private MIBs
• RMON MIB(RFC1757, rmon 1,2,3,9)
Management Features
Omada App Yes. Requiring the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller.
Centralized Management • Omada Cloud-Based Controller (Requires built-in version 5.15.22 or later)
• Omada Hardware Controller (Requires built-in version 5.15.20 or later)
• Omada Software Controller (Requires built-in version 5.15.20 or later)
Cloud Access Yes. Requiring the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller.
Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller
Management Features • Web-based GUI
• Command Line Interface (CLI) through telnet
• SNMPv1/v2c/v3
• SNMP Trap/Inform
• RMON (1,2,3,9 groups)
• SDM Template
• DHCP/BOOTP Client
• Dual Image, Dual Configuration
• CPU Monitoring
• Cable Diagnostics
• IEEE 802.1az Energy Efficient Ethernet (EEE)
• SNTP
• System Log
• Digital Diagnostic Monitoring (DDM)
• Operation Administration and Maintenance (OAM)
OTHERS
Certification CE, FCC, RoHS
Package Content • SG2206MP
• Power Adapter
• Power Cord
• Rackmount Kit
• Rubber Feet
• Installation Guide
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux.
Environment • Operating Temperature: -5–40 ? (23–104 ?);
• Storage Temperature: -40–70 ? (-40–158 ?)
• Operating Humidity: 10–90% RH, non-condensing
• Storage Humidity: 5–90% RH, non-condensing
12242 Kč
cena s DPH
Cisco switch CBS350-24MGP-4X-EU - REFRESH
CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu
Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci.
Záruka platná do End of Support 31. 10. 2029.
Oznámení End of Life pro CISCO CBS350
Stránky produktu: CBS350-24MGP-4X-EU
Quick start guide: Quick start guide
Switching capacity and forwarding rate (All switches are wire speed and nonblocking) Capacity in Millions of Packets per Second (mpps) (64-byte packets) 104.16
Switching Capacity in Gigabits per Second (Gbps) 140
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4,094 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols.
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets
Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for classless interdomain routing
RIP v2 Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
High availability Fast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack
Plug-and-play stacking configuration/management Active/standby for resilient stack control
Autonumbering
Hot swap of units in stack
Ring and chain stacking options, auto stacking port speed, flexible stacking port options
High-speed stack interconnects Cost-effective high-speed 10G fiber interfaces.
Security ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers.
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing.
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if
30414 Kč
cena s DPH
Pokročilý 400G síťový switch s podporou 50G, 200G a 400G rychlostí. RouterOS v7, quad-core ARM CPU, 4GB RAM, dual-redundantní napájení, hot-swap ventilátory. Kombinuje 2× Ethernet, 8× SFP56, 2× QSFP56 a 2× QSFP56-DD porty.
1004 Kč
cena s DPH
StarTech NIC Controller Adapter Interní 4 porty PCIe na 3x USB 2.0
701 Kč
cena s DPH
TP-Link switch LS105GP
5-Portový stolní gigabitový switch se 4 porty PoE+
Plně gigabitové porty : Pět gigabitových portů auto-negotiation poskytuje přepínací kapacitu až 10 Gb/s.
Rozpočet 65 W PoE : Čtyři gigabitové porty PoE+ kompatibilní s 802.3af/at se snadno připojují a napájejí pevná zařízení, jako jsou IP kamery, přístupové body a IP telefony, pomocí jediného kabelu. Každý port PoE podporuje výstup až 30 W PoE.
Přenos PoE až na 250 m : Díky režimu Extend dosahuje přenosová vzdálenost PoE až 250 m, což je ideální pro nasazení kamerových systémů ve velkých oblastech.
PoE Auto Recovery : Automaticky restartuje vaše spadlá nebo nereagující zařízení napájená PoE.
Plug and Play : Okamžité připojení bez nutnosti konfigurace.
Tichý provoz : Konstrukce bez ventilátoru snižuje spotřebu energie a zajišťuje tichý provoz, ideální pro domácnosti nebo firmy citlivé na hluk.
Spolehlivý design hardwaru : Odolné kovové pouzdro a design pro montáž na stůl/zeď jsou vhodné pro různá prostředí.
Learn more about TP-Link PoE technology >
Stránky produktu: https://www.tp-link.com/za/business-networking/litewave-switch/ls105gp/
Technické specifikace
HARDWARE FEATURES
Interface
• 5× 10/100/1000Mbps RJ45 Ports (Ports 1–4 supports 802.3af/at PoE+) • AUTO Negotiation • AUTO MDI/MDIX
Network Media
• 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m); EIA/TIA-568 100? STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m); EIA/TIA-568 100? STP (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m); EIA/TIA-568 100? STP (maximum 100m)
Fan Quantity
Fanless
Installation
• Desktop • Wall Mounting
Power Supply
External Power Adapter (Output: 53.5 VDC / 1.31 A)
PoE Ports (RJ45)
• Standard: 802.3 af/at compliant • PoE Ports: Ports 1–4, up to 30 W PoE output per port • Power Supply: 65 W
Dimensions ( W x D x H )
3.9×3.9×1.0 in (99.8×98×25 mm)
Max Power Consumption
• 4 W (220/50 Hz. no PD connected) • 74.46 W (220/50 Hz. with 65 W PD connected)
Max Heat Dissipation
• 13.6 BTU/h (no PD connected) • 253.16 BTU/h (with 65 W PD connected)
PERFORMANCE
Switching Capacity
10 Gbps
Packet Forwarding Rate
7.44 Mpps
MAC Address Table
2K
Jumbo Frame
16 KB
SOFTWARE FEATURES
Advanced Features
• Extend Mode Button (Ports 1–2, Up to 250 m PoE power supply and data transmission) • PoE Auto Recovery Button (Ports 1-4) • Compatible With IEEE 802.3af/at Compliant PDs • Mac Address Auto-Learning and Auto-Aging • IEEE 802.3x Flow Control • 802.1p/DSCP QoS • IGMP Snooping • Green Technology
Transfer Method
Store-And-Forward
OTHERS
Certification
FCC, CE, RoHS
Package Contents
• LS105GP • Power Adapter • Installation Guide
Environment
• Operating Temperature: 0–40 °C (32–104 °F); • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing
12476 Kč
cena s DPH
Traffic Management
Auto Negotiation of speed and duplex modes
IEEE 802.3x Flow Control
Dynamic MAC address management
IEEE 802.1Q-based VLAN
Auto Voice VLAN
Auto Video VLAN (selected models)
VLAN routing (selected models)
QoS based o
3292 Kč
cena s DPH
Model: Hewlett Packard Enterprise Aruba Instant On 1430 16G
Switch: Ano
Typ switche: Des...
679 Kč
cena s DPH
Netgear GS308 je určen k umístění na stůl případně pověšení na zeď. Technologie 10/100/1000Base-T pomůže šířit data až při rychlosti 1000 Mbit/s. Počet portů s rychlostí 1 Gbit: 8. Přenosová rychlost LAN portů: 1 Gbit. Přepínací kapacita: 16Gb/s.
5436 Kč
cena s DPH
Cisco Catalyst switch C1300-8FP-2G - REFRESH
CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu
Sada pro montáž do racku není součástí balení.
Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu.
Stránky produktu: C1300-8FP-2G
Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking)
Capacity in millions of packets per second (mpps) (64-byte packets) 14.88
Switching capacity in gigabits per second (Gbps) 20.0
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support
Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default
Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported
Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4093 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN
Auto surveillance VLAN (ASV)
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect
Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks
DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported)
IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wire-speed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wire-speed routing of IPv6 packets
Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for CIDR
Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL)
DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions
Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard Prevents edge devices not in the network administrator’s control from becoming STP root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP servers
IP Source Guard (IPSG) When IPSG is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks
IP/MAC/port binding (IPMB) The preceding featur...
2016 Kč
cena s DPH
- 16 alebo 24 gigabitových portov LAN na vysokorýchlostné káblové pripojenie - Pohodlná inštalácia Plug-and-play Spoľahlivosť - Zabudovaná 4 kV prepäťová ochrana na všetkých portoch Gigabit Ethernet - Odolné kovové puzdro - Možnosť montáže do stojana - Bezventilátorová konštrukcia Energeticky úsporný a ekologický - Znižuje napájanie portu, keď nie je prevádzka - Optimalizuje spotrebu energie portu na základe dĺžky pripojeného kábla - Energeticky úsporná konštrukcia znižuje produkované teplo a umožňuje tichý chod prepínača 24-portový GIGABIT EASY DESKTOP SWITCH - 24-portový gigabitový prepínač - Auto MDI.MDIZ crossover pre všetky porty - Full/half-duplex pre rýchlosti Ethernet / Fast Ethernet - Plug-and-play inštalácia - Energy Star Level V kvalifikácia - D-Link Green (automatické vypnutie nepoužívaných portov) - Interný univerzálny napájací zdroj s napájacím káblom - Kovové puzdro, čierna farba, stolová a stojanová montáž (gumové nožičky a sada pre stojanovú montáž sú súčasťou balenia), 1 HE.
2915 Kč
cena s DPH
GPERx6 umožňuje rozšířit napájení a optické vlákno společně pomocí jediného hybridního kabelu.
Na druhém konci jej GPERx6 přehledně rozdělí:
• SFP+ pro další dálkové uplinky
• PoE-out pro napájení kamer nebo přístupových bodů
• DC výstupy pro zařízení IoT nebo specializovaná zařízení
GPERx6 eliminuje problémy s aspekty nepříznivých meteo podmínek při venovních instalacích, zjednodušuje nasazení a nabízí:
• 3 gigabitové ethernetové porty s PoE-in (#1) a PoE-out (#2 a #3)
• 3× 10G SFP+ klece pro dálkové optické kabely
• 3 DC výstupy pro zařízení, která nepoužívají PoE, například IoT zařízení
• Odolný kryt IP66 s praktickým montážním hardwarem
• Speciální 10G switch čip (testovaný v oblíbených ISP zařízeních, jako je netPower Lite 7R)
Tedy řešení, umožňující správu napájení a dat na dlouhé vzdálenosti (1–2 km) i v těch nejnáročnějších scénářích.
Konktétní případové nasazení:
Jedním z možných použití GPERx6 je možnost přerušit stávající optické vedení a připojit zákazníky podél trasy (proto jsou k dispozici 3 porty SFP+ – vstupní vedení, zákaznické místo, výstupní vedení).
Jedná se o častý problém, kdy optické vedení vede podél nemovitosti, ale poskytovatel internetových služeb odmítá připojit konkrétní nemovitost, protože nechce přerušit optické vedení.
Výhoda hybridních kabelů
Díky hybridním optickým a metalice se GPERx6 stává životně důležitým zdrojem energie a dat:
• Optická vlákna přenášejí vaše vysokorychlostní uplinky.
• Měděné vodiče dodávají stejnosměrný proud.
Na druhém konci GPERx6 vše rozděluje:
° SFP+ uplinky pro data.
° PoE-out pro kamery nebo přístupové body.
° DC-out pro zařízení IoT nebo speciální hardware
Podrobné technické specifikace:
Product code: CSS606-1G-2Gi-3S+OUT
Number of 1G Ethernet ports: 3
Number of 10G SFP+ ports: 3
Switch chip model: 88E6193X
Certification: IP66
Dimensions: 406 x 116 x 76 mm
Operating system: SwOS
Operating temparature: -40°C to +70°C
Napájení:
Number of DC inputs: 2 (DC jack, PoE-In)
DC jack input Voltage: 12-57 V
PoE-In input Voltage: 42-57 V
PoE-In: 802.3 bt
PoE-Out: Passive PoE up to 57V (Ether2- Ether3)
Max out per port output (input < 30 V): 1.2 A
Max out per port output (input > 30 V): 0.625 A
Max total out: 2.4 A
Number of DC-out ports: 3, DC1-DC3 Max total out 3.6 A
Max power consumption (without attachments): 6 W
Max power consumption: 160 W
Upozornění:
Výrobce MIKROTIK nevztahuje záruku na zařízení poškozená přepětím.
Zařízení je třeba na vstupech adekvátně chránit proti indukovanému elektrostatickému přepětí či přepěťovým špičkám na silovém vedení.
Při venkovních instalacích je třeba používat stíněnou kabeláž (FTP/SFTP), příslušné přepěťové ochrany (pokud nejsou integrovány) a provést korektní a efektivní uzemnění.
Zařízení vždy provozujte s poslední výrobcem publikovanou verzí (výrobcem označenou "Stable") operačního systému RouterOS/SwOS.
Taková verze garantuje nejoptimálnější funčknost, obsahuje opravené chyby z verzí předchozích a výkonová vylepšení.
663 Kč
cena s DPH
PCI-Express síťová karta AXAGON PCEE-GIX rozšíří stolní počítač o vysokorychlostní Gigabit Ethernet připojení. Zpětně kompatibilní s 10/100Base-T sítěmi. Karta je osazena výkonným čipem I210AT společnosti Intel , který nabízí mnoho rozšířených funkcí jako například precizní synchronizaci času, tvarování provozu pro AV streamy, funkce snižující zatížení procesoru a podporu široké škály řízení spotřeby. LAN adaptér podporuje bootování po síti (PXE) a zaručuje bezproblémovou kompatibilitu s většinou operačních systémů. Gigabitová síťovka rozšíří počítač o rychlé síťové připojení , doplní chybějící RJ-45 konektor, přidá další síťovou kartu nebo nahradí původní nefunkční síťové připojení. Balení obsahuje kromě adaptéru se záslepkou standardního rozměru také low profile záslepku umožňující montáž adaptéru do nízkoprofilových skříní.
Vstup: • Rozhraní PCI-Express 2.1, kompatibilní s PCI-Express 1.0a / 1.1 / 2.0 / 3.0. • Počet linek 1-Lane (x1), kompatibilní s x1 / x4 / x8 / x16 PCIe sloty. • Propustnost 1-Lane PCI-Express 2.1 sběrnice 5 Gb/s.
Výstup: • Rozhraní Gigabit Ethernet s RJ-45 konektorem pro připojení UTP nebo STP kabelem. • Podporované přenosové rychlosti Ethernet rozhraní 10/100/1000 Mb/s. • Podporované specifikace IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T.
Další vlastnosti: • Plná podpora Plug and Play. • 10/100/1000 Mbit/s autodetekce. • Podpora TCP/UDP, IPv4 checksum, IPv6 IP/TCP a IP/UDP checksum offload (Rx/ Tx/Large- send) pro snížení zatížení procesoru. • Podpora full-duplex přenosů s IEEE 802.3x a IEEE 802.3z flow control. • Podpora IEEE 802.3az-2010 (EEE) Energy Efficient Ethernet - snížení spotřeby v klidovém stavu. • Podpora Receive-Side Scaling (RSS) pro Windows - až čtyři fronty na port. • Podpora Auto MDI/MDIX - crossover detekce a autokorekce eliminuje potřebu crossover kabelů. • Podpora hardwarové funkce ECC (Error Correction Code). • Podpora Jumbo frames (až do 9.5 kB). • Podpora IEEE 1588/802.1AS Timestamping - HW podpora precizní synchronizace času. • Podpora IEEE 802.1Qav - směrování a queuing časově citlivých toků. • Podpora IEEE 802.1BA (802.1 AVB) - vylepšuje synchronizaci, spolehlivost a latenci audiovizuálních přenosů po síti. • Nabízí širší možnosti správy ve firemním prostředí. • Podpora bootování ze sítě díky integrovanému PXE. • Podpora IEEE 802.1Q VLAN. • Dvě LED diody pro indikaci aktivity a připojení ke gigabit síti. • Použit čipset Intel I210-AT.
Podpora funkce Wake-on-LAN v různých módech: • Podpora režimu spánku a vzdáleného probuzení přes Magic packet. • Podpora standardu ECMA-393 proxZzzy® for sleeping hosts pro správu síťového připojení spících hostů pomocí proxy serverů.
Pokročilé funkce Power Managementu: Síťová karta podporuje pokročilou správu napájení redukující ztráty při klidovém stavu nebo lehkém provozu na síti. Dále podporuje pokročilou úsporu energie při odpojení Ethernet kabelu. • Podpora Advanced Configuration Power management Interface (ACPI). • Podpora Advanced Power Management (APM). • Podpora Active State Power Management (ASPM). • Podpora PCI MSI (Message Signaled Interrupt) a MSI-X.
Podporované operační systémy: • MS Windows 7 / 8 / 8.1 / 10 / 11 a novější, Windows Server 2008 R2 / 2012 / 2012 R2 / 2016 / 2019 / 2022 a novější (podporovány všechny 32- i 64-bitové verze OS Windows), Linux kernel 2.6.30 a novější, FreeBSD 10.x/11.x/12.x.
Balení v kartónové krabičce obsahuje: • PCI-Express Gigabit Ethernet karta se standardní záslepkou, • low profile záslepka, • multijazyčný manuál CZ/DE/DK/ENG/ESP/FIN/FR/GR/HR/HU/IT/NL/PL/PT/RO/RU/SK/SWE/TR/BG/CN/ARA.
7183 Kč
cena s DPH
Ubiquiti UniFi Switch Aggregation; UniFi Switch Aggregation je spolehlivý switch s managementem v profesionálním provedení s možností montáže do racku. USW-Aggregation je vysoce výkonný L2 agregační přepínač...
16672 Kč
cena s DPH
TP-Link switch OMADA SG3428XMPP
Omada 24portový gigabitový a 4portový 10GE SFP+ Managed switch L2+ s 16 porty PoE+ a 8 porty PoE++
4× 10 Gb/s SFP+ sloty
8× Gigabitové porty s podporou 802.af/at/bt PoE++ (Max 90 W rozpočet PoE pro každý port)
16× Gigabitové porty s podporou 802.3af/at PoE+ (Max 30 W rozpočet pro každý port)
500 W celkový rozpočet PoE*
Centralizovaný cloudový management přes web nebo aplikaci Omada
Samostatný management přes web, CLI, SNMP a RMON
Statické směrování pro efektivní směrování interního provozu
VLAN, ACL, QoS, IGMP Snooping, OAM a DDM
ERPS podporuje rychlou ochranu a obnovu v kruhové topologii
Odolné kovové pouzdro a design pro montáž do racku
Více informací o TP-Link PoE technologii >
Více informací o Omada SDN >
Více informací o 10G Multi-Gigabit řešení >?
Stránky produktu: https://www.tp-link.com/cz/business-networking/omada-switch-l3-l2-managed/sg3452xmpp/
Technické specifikace
HARDWARE FEATURES
Interface • 24× 10/100/1000 Mbps RJ45 Ports (8× PoE++, 16× PoE+)
• 4× 10G SFP+ Slots
• 1× RJ45 Console Port
• 1× Micro-USB Console Port
Fan Quantity 3
Physical Security Lock ?
Power Supply 100-240 V AC~50/60 Hz
PoE Ports (RJ45) • Standard: 802.3at/af/bt compliant
• PoE++ Ports: Ports 1~8 (up to 90 W PoE Output per Port)
• PoE+ Ports: Ports 9~24 (up to 30 W PoE Output per Port)
• Power Budget: 500 W*
Dimensions ( W x D x H ) 17.3×13.0×1.7 in (440×330×44 mm)
Mounting Rack Mountable
Max Power Consumption • 605.5 W (110V/60Hz) ( with 500 W PD connected)
Max Heat Dissipation • 2064.96 BTU/hr (110 V/60 Hz) (with 500 W PD connected)
PERFORMANCE
Switching Capacity 128 Gbps
Packet Forwarding Rate 95.23 Mpps
MAC Address Table 16 K
Packet Buffer Memory 12 Mbit
Jumbo Frame 9 KB
SOFTWARE FEATURES
Quality of Service • 8 priority queues
• 802.1p CoS/DSCP priority
• Queue scheduling: SP (Strict Priority), WRR (Weighted Round Robin), SP+WRR
• Bandwidth Control: Port/Flow-based Rating Limiting
• Smoother Performance
• Action for Flows: QoS remark (802.1P Remark, DSCP Remark)
L2 and L2+ Features • 128 IP Interfaces: Support IPv4/IPv6 Interface
• Static Routing: 48 IPv4/IPv6 Static Routes
• Static ARP: 128 static entries
• 512 ARP Entries
• Proxy ARP
• Gratuitous ARP
• DHCP Server
• DHCP Relay: DHCP Interface Relay, DHCP VLAN Relay
• DHCP L2 Relay
• Link Aggregation
• Spanning Tree Protocol
• Loopback Detection
• 802.3x Flow Control
• Mirroring
L2 Multicast • Supports 1000 (IPv4, IPv6) IGMP groups
• IGMP Snooping
• IGMP Authentication
• Multicast VLAN Registration (MVR)
• MLD Snooping
• Multicast Filtering: 256 profiles and 16 entries per profile
Advanced Features • Automatic Device Discovery†
• Batch Configuration†
• Batch Firmware Upgrading†
• Intelligent Network Monitoring†
• Abnormal Event Warnings†
• Unified Configuration†
• Reboot Schedule†
ISP Features**:
• L2PT (Layer 2 Protocol Tunneling)
• Device Link Detect Protocol (DLDP)
• PPPoE ID Insertion
• ERPS
• 802.3ah Ethernet Link OAM
• DDM
• sFlow
VLAN • VLAN Group: Max 4K VLAN Groups
• 802.1q Tagged VLAN
• MAC VLAN: 30 Entries
• Protocol VLAN: Protocol Template 16, Protocol VLAN 16
• Private VLAN
• GVRP
• VLAN VPN: VLAN Mapping, VLAN Replace
• Voice VLAN
Access Control List • Time-based ACL
• MAC ACL: Source MAC, Destination MAC, VLAN ID, User Priority, Ether Type
• IP ACL: Source IP, Destination IP, Fragment, IP Protocol, TCP Flag, TCP/UDP Port, DSCP/IP TOS
• Combined ACL
• Packet Content ACL
• IPv6 ACL
• Policy: Mirroring, Redirect, Rate Limit, QoS Remark
• ACL applies to Port/VLAN
Security • IP-MAC-Port Binding
- 512 Entries
- DHCP Snooping
- ARP Inspection
- IPv4 Source Guard: 100 Entries
• IPv6-MAC-Port Binding
- 512 Entries
- DHCPv6 Snooping
- ND Detection
- ND Snooping
- IPv6 Source Guard: 100 Entries
• DoS Defend
• DHCP Filter
• Static/Dynamic Port Security: Up to 64 MAC addresses per port
• Broadcast/Multicast/Unicast Storm Control: kbps/ratio/pps control mode
• 802.1X
- Port-based authentication
- Mac-base authentication
- VLAN Assignment
- MAB
- Guest VLAN
- Radius authentication and accountability support
• AAA (including TACACS+)
• Port Isolation
• Secure web management through HTTPS with SSLv3/TLS 1.2
• Secure Command Line Interface (CLI) management with SSHv1/SSHv2
• IP/Port/MAC-based access control
IPv6 • IPv6 Dual IPv4/IPv6
• Multicast Listener Discovery (MLD) Snooping
• IPv6 ACL
• IPv6 Interface
• Static IPv6 Routing
• IPv6 neighbor discovery (ND)
• Path maximum transmission unit (MTU) discovery
• Internet Control Message Protocol (ICMP) version 6
• TCPv6/UDPv6
• IPv6 applications: DHCPv6 Client, Ping6, Tracert6, Telnet (v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP
MIBs • MIB II (RFC1213)
• Interface MIB (RFC2233)
• Ethernet Interface MIB (RFC1643)
• Bridge MIB (RFC1493)
• P/Q-Bridge MIB (RFC2674)
• RMON MIB (RFC2819)
• RMON2 MIB (RFC2021)
• Radius Accounting Client MIB (RFC2620)
• Radius Authentication Client MIB (RFC2618)
• Remote Ping, Traceroute MIB (RFC2925)
• Support TP-Link private MIB
MANAGEMENT
Omada App Yes. Requiring the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller.
Centralized Management • Omada Cloud-Based Controller
• Omada Hardware Controller
• Omada Software Controller
Cloud Access Yes. Requiring the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller.
Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller.
Management Features • Web-based GUI
• Command Line Interface (CLI) through console port, telnet
• SNMPv1/v2c/v3
- Trap/Inform
- RMON (1, 2, 3, 9 groups)
• SDM Template
• DHCP/BOOTP Client
• 802.1ab LLDP/LLDP-MED
• DHCP AutoInstall
• Dual Image, Dual Configuration
• CPU Monitoring
• Cable Diagnostics
• EEE
• Password Recovery
• SNTP
• System Log
OTHERS
Certification CE, FCC, RoHS
Package Contents • SG3428XMPP Switch
• Power Cord
• Quick Installation Guide
• Rackmount Kit
• Rubber Feet
System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux.
Environment • Operating Temperature: 0–40 ? (32–104 ?);
• Storage Temperature: -40–70 ? (-40–158 ?)
• Operating Humidity: 10–90% RH non-condensing
• Storage Humidity: 5–90% RH non-condensing
20613 Kč
cena s DPH
UBIQUITI UACC-OM-SM-10G-D-20 OPTICAL MODULE SINGLE-MODE MODULE 10GBPS 20-PACK