KATEGORIE
![UBNT UniFi Switch USW-Pro-48 Gen2 [48xGigabit, 4xSFP+, 176Gbps]](/drawImage?thumbnail=m&id=2329593 "UBNT UniFi Switch USW-Pro-48 Gen2 [48xGigabit, 4xSFP+, 176Gbps]")
Kategorie: Přepínače
1179 Kč
cena s DPH
StarTech.com USB 2.0 Fax Modem, 56K External Hardware Dial Up V.92 Modem/Dongle/Adapter, Computer/Laptop Fax Modem, USB to Telephone Jack, USB Data Modem, Network Fax/CMR/POS
3381 Kč
cena s DPH
Cisco ATA 192 Multiplatform Analog Telephone Adapter
1664 Kč
cena s DPH
Ubiquiti UACC-CM-RJ45-MG; SFP+ metalický modul/konvertor umožňuje připojit Ethernet kabel s konektorem RJ-45 . Kompatibilní se všemi 10Gbps SFP+ porty/sloty Ubiquiti zařízení. ZÁKLADNÍ...
4800 Kč
cena s DPH
Cisco Business CBS110-16PP-EU; Unmanaged PoE switch nabízející 16 portů GbE RJ-45 a napájecí PoE budget 64 W (8 portů). Přepínací kapacita switche je 32 Gbps a rychlost směrování činí 23...
10350 Kč
cena s DPH
Aruba Instant On 1930 48G 4SFP/SFP+ Switch
Aruba Instant On 1930 48G 4SFP/SFP+ Switch (JL685A)
I/O Ports and Slots
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE- TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 SFP+ 1/10GbE ports
Physical Characteristics
Dimensions
17.42(w) x 11.12(d) x 1.73(h) in
(44.25 x 28.24 x 4.39 cm)
(1U height)
Weight
6.91 lb (3.13 kg)
CPU
ARM Cortex-A9 @ 800 MHz
Memory And Flash
512 MB SDRAM
256 MB flash
Packet Buffer
1.5 MB
Performance
100 Mb latency
< 4.5 uSec
1000 Mb latency
<2.2 uSec
10000 Mb latency
<1.2 uSec
Throughput (Mpps)
130.95 Mpps
Capacity
176 Gbps
Routing table size (# of static entries)
32
MAC address table size (# of entries)
16,000
Reliability MTBF (years)
114
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative humidity
15% to 95% @ 104°F (40°C)
Non-operating temperature
-40°F to 158°F (-40°C to 70°C)
Non-operating relative humidity
15% to 95% @ 140°F (60°C)
Altitude
Up to 10,000ft (3.048 Km)
Acoustic 1
Fanless
Notes: 1 Acoustics measured in 23°C semi-anechoic chamber with a loading of 100% traffic and 50% PoE on all ports. Measured in accordance with ISO 7779. Declared in accordance with ECMA-109:2010. Values presented are the Declared A-Weighted Sound Power Level (LWAd) and the mean Bystander A-Weighted Sound Pressure Level (LpAm)
Electrical Characteristics
Frequency
50-60 Hz
AC voltage
100 - 127 / 200 - 240 VAC
Current
.8 A/.5 A
Maximum power rating
36.9 W
Idle power
16.8 W
PoE power
n/a
Power supply
Internal power supply
Safety
UL 60950-1; IEC 60950-1;EN 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60825-1
UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368-1:2014
Emissions
VCCI-CISPR 32, Class A; CNS 13438; ICES-003 Issue 6 Class A; FCC CFR 47 Part 15, Class A; EN 55032: 2015 +AC:2016 / CISPR-32, Class A
Immunity
Generic
CISPR 24 / CISPR 35
EN
EN 55024:2010 / EN 55035:2017
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency magnetic field
IEC 61000-4-8
Voltage dips and interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2, EN 61000-3-2
Flicker
IEC 61000-3-3, EN 61000-3-3
Device Management
Aruba Instant On Cloud; Web browser; SNMP Manager
Mounting
Mounts in an EIAstandard 19 in. telco rack or equipment cabinet. 2-post rack kit included
Supports table-top mounting
Supports rackmounting
Supports wall-mounting with ports facing either up or down
Supports under-table mounting using the brackets provided
Must be mounted top surface up. To prevent possible impact to longterm reliability, product should not be mounted upside-down
Transceivers
Aruba Instant On 1G SFP LC SX 500m OM2 MMF Transceiver (R9D16A )
Aruba 1G SFP LC LX 10km SMF Transceiver (J4859D)
Aruba Instant On 1G SFP RJ45 T 100m Cat5e Transceiver (R9D17A)
Aruba Instant On 10G SFP+ LC SR 300m OM3 MMF Transceiver (R9D18A)
Aruba 10G SFP+ LC LR 10km SMF Transceiver (J9151E)
28766 Kč
cena s DPH
Cisco switch CBS350-16XTS-EU - REFRESH
CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu
Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci.
Záruka platná do End of Support 31. 10. 2029.
Oznámení End of Life pro CISCO CBS350
Stránky produktu: CBS350-16XTS-EU
Quick start guide: Quick start guide
Switching capacity and forwarding rate (All switches are wire speed and nonblocking) Capacity in Millions of Packets per Second (mpps) (64-byte packets) 238.08
Switching Capacity in Gigabits per Second (Gbps) 320
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4,094 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols.
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets
Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for classless interdomain routing
RIP v2 Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Stacking Hardware stacking Up to 4 units in a stack. Up to 200 ports managed as a single system with hardware failover
High availability Fast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack
Plug-and-play stacking configuration/management Active/standby for resilient stack control
Autonumbering
Hot swap of units in stack
Ring and chain stacking options, auto stacking port speed, flexible stacking port options
High-speed stack interconnects Cost-effective high-speed 10G fiber interfaces.
Security ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers.
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping...
16531 Kč
cena s DPH
UBNT UniFi Switch USW-Pro-48
UniFi Switch Pro 48 is a fully managed Layer 3 switch with (48) Gigabit Ethernet ports. (4) 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability. The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Switch Pro 48 is an ideal aggregation and access layer switch for any UniFi solution – it combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere. Features: (48) Gigabit RJ45 ports (4) 10G SFP+ ports Layer 2 and Layer 3* features UniFi SmartPower RPS DC input Near-silent cooling 1.3" touchscreen display Managed by UniFi Network Controller * Available in future firmware upgrade.
Užitečné odkazy:
stránky výrobce UBNT.com
aktuální verze airOS
datasheety, uživatelské příručky
výpočet parametrů bezdrátového spoje - AirLink
návody pro začátečníky - BeansTalk
video-návody (ubnt youtube channel)
Ubiquiti Wiki
Ubiquiti oficiální fórum
634 Kč
cena s DPH
TL-SG108S je osmiportový 10/100/1000 Mbit/s switch. Jedná se o velmi kompaktní řešení, které poskytuje osm rychlých gigabitových portů a je tak ideální pro domácnosti, či menší kanceláře. Green ethernet technology snižuje spotřebu zařízení na naprosté minimum. Podporuje 802.1p/DSCP QoS and IGMP Snooping funkce, které přispívají lepší latenci a optimalizaci přenosu při náročnějších multicast přenosech. Konstrukčně potěší stabilní kovové tělo a tichá konstrukce bez ventilátorů.
Obsah balení
Zařízení
Napájecí adaptér
2971 Kč
cena s DPH
StarTech.com 4-port PCI Express RS232 Serial Adapter Card, PCIe RS232 Serial Host Controller Card, PCIe to Serial DB9, 16950 UART, Low Profile Desktop Expansion Card, Windows, macOS, Linux
18974 Kč
cena s DPH
Cloudové sítě jsou jednodušší s Nuclias.
D-Link přepínače Nuclias se správou z cloudu jsou předkonfigurovány a jsou ovládány vzdáleně prostřednictvím webového prohlížeče Nuclias Cloud nebo z aplikac
12839 Kč
cena s DPH
QSW-M2106-4C
Webově řízený switch 10GbE a 2,5GbE úrovně 2 pro zavádění sítí v malých a středních podnicích
Funkce
Zařízení QSW-M2106-4C je webově řízený přepínač (switch) úrovně 2 se čtyřmi kombinovanými porty 10GbE SFP+/RJ45 a šesti porty 2,5 Gigabi
239 Kč
cena s DPH
MikroTik SAW30-240-1200GR2A , napájecí adaptér
Originální MikroTik napájecí adaptér s přímou instalací do zásuvky se standardním 5.5 / 2.1mm konektorem určeným pro napájení například MikroTik zařízení se vstupním napětím 24V DC. Napájecí adaptér má maximální výkon 29W a max. výstupní proud je 1,2A. Konektor je zahnutý 90°..
Technické specifikace:
Fyzické charakteristiky
Konstrukce: Přímo do zásuvky
Výstupní konektor [mm]: 5.5 / 2.1
Hmotnost [g]: 200
Napájení
Typ zdroje: Spínaný
Výkon [W]: 29
Výstupní napětí [V]: 24
Výstupní proud [A]: 1,2
Užitečné odkazy:
Jak se bránit ESD
veškeré informace o produktech společnosti MikroTik
aktuální verze RouterOS ke stažení
aktuální verze WinBoxu
výpočet parametrů bezdrátového spoje
19538 Kč
cena s DPH
Aruba Instant On usnadňuje udržení spokojenosti uživatelů sítě, připojení mobilních zařízení, zařízení IoT a zabezpečení vaší sítě.
Přepínače Aruba Instant On 1930 jsou pokročilé, inteligentně spravo
3850 Kč
cena s DPH
Cisco switch CBS250-8FP-E-2G (8xGbE,2xGbE/SFP combo,8xPoE+,120W,fanless) - REFRESH
71118 Kč
cena s DPH
NETGEAR M4300-8X8F Stackable mngd.Switch mit 16x10G incl.8x10GBASE-T + 8xSFP+ Layer 3 SDN-ready Open Flow 1.3
3924 Kč
cena s DPH
TP-Link switch TL-SL1218P
16portový 10/100 Mb/s + 2portový gigabitový switch do racku s 16 porty PoE+
16 portů RJ45 PoE + 10/100Mb/s, 2 gigabitové porty RJ45 a 1 kombinovaný gigabitový SFP slot.
Vysoký výkon PoE napájení, až 30 W pro každý PoE port a 150 W pro všechny PoE porty
Přenos dat a napájení až do vzdálenosti 250 m v režimu prodloužení speciálně navrženého pro dohledový systém.
Prioritní režim pro porty 1-8, který zaručuje kvalitu citlivých aplikací, jako je například video monitor.
Režim izolace umožňuje oddělení provozu klienta jedním kliknutím pro vyšší zabezpečení a výkon.
Snadné použití bez nutnosti konfigurace a instalace.
Stránky produktu: https://www.tp-link.com/cz/business-networking/unmanaged-switch/tl-sl1218p/
Technické specifikace
HARDWARE FEATURES
Interface
• 16× PoE+ 10/100 Mbps RJ45 Ports • 2× 10/100/1000 Mbps RJ45 Ports • 1× Combo Gigabit SFP Slot
Network Media
• 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • EIA/TIA-568 100Ohm STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m) • EIA/TIA-568 100Ohm (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) • EIA/TIA-568 100Ohm (maximum 100m) • 1000BASE-X MMF, SMF
Fan Quantity
2 Fans
Physical Security Lock
Yes
Power Supply
100–240V AC, 50/60 Hz
PoE+ Ports(RJ45)
• Standard: 802.3at/802.3af compliant • PoE Ports: Ports 1–16 • PoE Power Budget: 150 W
Dimensions ( W x D x H )
17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm)
Max Power Consumption
• 12.71 W (220/50Hz. no PD connected) • 172.8 W (220/50Hz. with 150 W PD connected)
Max Heat Dissipation
• 43.34 BTU/h (no PD connected) • 589.25 BTU/h (with 150 W PD connected)
PERFORMANCE
Switching Capacity
7.2 Gbps
Packet Forwarding Rate
5.36 Mpps
MAC Address Table
8K
Jumbo Frame
10 KB
SOFTWARE FEATURES
Advanced Features
• Compatible With IEEE 802.3at/af Compliant PDs • Extend Mode (Up to 250m PoE power supply and data transmission) • Priority Mode • Isolation Mode • Mac Address Auto-Learning And Auto-Aging • IEEE802.3x Flow Control
Transmission Method
Store-And-Forward
OTHERS
Certification
CE, FCC, RoHS
Package Contents
• TL-SL1218P • Power Cable • Installation Guide • Two mounting brackets and the fittings
Environment
• Operating Temperature: 0–50 °C (32–122 °F) • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing