KATEGORIE
Kategorie: Routery a switche
2670 Kč
cena s DPH
Typ:
Typ: Switch
Vybavení:
Počet Gigabit-Portů: 24
Jumbo rámeček: 10K (max.)
PoE (Power over Ethernet): ne
Podporované síťové protokoly:
IEEE 802.1p: ano
IEEE 802.3 10-BASE-T, Ethernet: ano
IEEE 802.3ab 1000-BASE-T, Gigabit Ethernet: ano
IEEE 802.3u 100-BASE-TX, Fast Ethernet: ano
IEEE 802.3x Flow Control (Full-Duplex Flow Control): ano
Montáž:
všeobecný:
Šířka (mm): 294
Výška (mm): 44
Hloubka (mm): 180
165 Kč
cena s DPH
Cisco Meraki MX68W Enterprise License and Support,
1 Day
10080 Kč
cena s DPH
Modem: ADSL / ADSL2 / ADSL2+ / VDSL2
WiFi-Standard: Wi-Fi 7 (IEEE 802.11be)
Frekvence: 2,4 / 5 GHz
Počet Gigabit-Portů: 2x 1 GBit + 1x 2,5 GBit
WAN-Port: 1x 2,5 GBit/s
USB: 1x USB-A 2.0
Hostovská sít: ano
Kódování: WPA2
WPS tlačítko (WiFi Protected Setup): ano
Typ: WiFi router s modemem
Anténa: interní
Počet antén: 4 + 4
Max. přenosová rychlost WiFi (Mbit/s): 5760
Barva: bílá / červená
Rozměry: 254 x 63 x 191
12885 Kč
cena s DPH
Cisco Catalyst switch C1300-24FP-4G - REFRESH
CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu
Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu.
Stránky produktu: C1300-24FP-4G
Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking)
Capacity in millions of packets per second (mpps) (64-byte packets) 41.66
Switching capacity in gigabits per second (Gbps) 56.0
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support
Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default
Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported
Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4093 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN
Auto surveillance VLAN (ASV)
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect
Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks
DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported)
IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wire-speed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wire-speed routing of IPv6 packets
Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for CIDR
Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL)
DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions
Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard Prevents edge devices not in the network administrator’s control from becoming STP root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP servers
IP Source Guard (IPSG) When IPSG is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks
IP/MAC/port binding (IPMB) The preceding features (DHCP snooping, IPSG, and DAI) work together to ...
8482 Kč
cena s DPH
Cisco SFP+ Copper Twinax Cable
4688 Kč
cena s DPH
TP-Link Deco X20(3-pack)
AX1800 Wi-Fi 6 Mesh Systém
Rychlejší připojení : Wi-Fi 6 s rychlostí až 1 800 Mb/s - 1 201 Mb/s v pásmu 5 GHz a 574 Mb/s v pásmu 2,4 GHz.
Připojte více zařízení : Technologie OFDMA a MU-MIMO čtyřnásobně zvyšuje kapacitu a umožňuje současný přenos k více zařízením.
Zesiluje hladké pokrytí : Dosáhněte hladké pokrytí v celé domácnosti jasnějším a silnějším signálem Wi-Fi generovaným sítí Wi-Fi 6.
Velmi nízká latence : Extrémně nízká latence umožňuje reaktivnější hraní her a videochatů.
Jedna sjednocená síť : Více jednotek tvoří domácí síť, která automaticky vybere nejlepší spojení, když se pohybujete po domácnosti.
Absolutní bezpečnost : Šifrování WPA3 a TP-Link HomeCareTM poskytují přizpůsobené funkce, včetně rodičovských kontrol, antivirů a kvality služeb (QoS), aby byl zajištěn bezpečnější online provoz.
Nastavení je snazší než kdykoli předtím : Aplikace Deco vás provede nastavením krok za krokem.
Stránky produktu: https://www.tp-link.com/cz/home-networking/deco/deco-x20/v2%20(3-pack)/
Technické specifikace
WIRELESS
Standards
Wi-Fi 6 IEEE 802.11ax/ac/n/a 5 GHz IEEE 802.11ax/n/b/g 2.4 GHz
WiFi Speeds
AX1800 5 GHz: 1201 Mbps (802.11ax) 2.4 GHz: 574 Mbps (802.11ax)
WiFi Range
4-6 Bedroom Houses (3-pack) TP-Link Mesh Technology Optional Ethernet backhaul work together to link Deco units to provide seamless coverage 2× Antennas (Internal) Multiple antennas form a signal-boosting array to cover more directions and large areas Beamforming Concentrates wireless signal strength towards clients to expand WiFi range
WiFi Capacity
High Dual-Band Distribute devices to different bands for optimal performance MU-MIMO Simultaneously communicates with multiple MU-MIMO clients OFDMA Simultaneously communicates with multiple WiFi 6 clients 4 Streams More than enough bandwidth for connected devices
Working Modes
Router Mode Access Point Mode
HARDWARE
Ethernet Ports
2× Gigabit Ports *Per Deco Unit Supports WAN/LAN auto-sensing
Buttons
Reset Button
SECURITY
WiFi Encryption
WPA-Personal WPA2-Personal WPA3-Personal
Network Security
SPI Firewall Access Control HomeCare™ Antivirus Malicious Site Checker Port Intrusion Prevention Infected Device Isolation Notification and Log
Guest Network
1× 5 GHz Guest Network 1× 2.4 GHz Guest Network
SOFTWARE
Protocols
IPv4 IPv6
Service Kits
HomeCare™ Learn More>
Parental Controls
HomeCare™ Parental Controls Custom Profiles Content Filtering URL FIltering Time Limit Time Schedule (Bed Time) Log Insight Usage Monitor Monthly Reports
WAN Types
Dynamic IP Static IP PPPoE PPTP L2TP
Quality of Service
HomeCare™ QoS QoS by Device QoS by Application
Cloud Service
OTA Firmware Upgrade TP-Link ID DDNS
NAT Forwarding
Port Forwarding UPnP
IPTV
IGMP Proxy IGMP Snooping Bridge Tag VLAN
DHCP
Address Reservation DHCP Client List Server
DDNS
TP-Link
Management
Deco App
TEST DATA
WiFi Transmission Power
CE: FCC:
PHYSICAL
Dimensions (W×D×H)
4.33 × 4.33 × 4.49 in (110 × 110 × 114 mm)
Package Contents
Deco X20 (3-pack) 3 Deco X20 Units 1 RJ45 Ethernet Cable 3 Power Adapters 1 Quick Installation Guide Deco X20 (2-pack) 2 Deco X20 Units 1 RJ45 Ethernet Cable 2 Power Adapters 1 Quick Installation Guide Deco X20 (1-pack) 1 Deco X20 Unit 1 RJ45 Ethernet Cable 1 Power Adapter 1 Quick Installation Guide
OTHERS
System Requirements
Android 5.0 or later iOS 9.0 or later *Note: The minimum system requirements will be updated alongside updates to the app, subject to official website information.
Certifications
CE, FCC, IC, RoHS, RCM, JPA, JRF, VCCI
Environment
Operating Temperature: 0°C~40°C (32°F ~104°F) Storage Temperature: -40°C~70°C (-40°F ~158°F) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing
1683 Kč
cena s DPH
Strong 4G LTE router 360; Sdílejte své 4G LTE internetové připojení kdekoliv a s jakýmkoliv zařízením. STRONG 4G LTE Router 360 je ideálním řešením pro vytvoření rychlého internetového připojení v místech s nedostupným nebo pomalým pevným internetem. ...
300 Kč
cena s DPH
Cisco EOS Meraki MX80 Enterprise License and Support, 1 Day
These products have reached end of ...
41599 Kč
cena s DPH
LANCOM 2100EF
53819 Kč
cena s DPH
QSW-M5216
Vysokorychlostní 25GbE řízený optický switch s připojením 10GbE pro páteřní sítě
Funkce
Zařízení QSW-M5216-1T je 16portový řízený 25GbE SFP28 optický switch s jedním portem 10GbE NBASE-T. Zařízení QSW-M5216-1T podporuje přepínání a správu s
12557 Kč
cena s DPH
LANCOM GS-2412P