KATEGORIE
Kategorie: Routery a switche
1623 Kč
cena s DPH
Wireless-N300 LTE Modem Router 4G LTE mobilné širokopásmové pripojenie pre superrýchly internet s rýchlosťou až 150 Mb/s Wireless-N s rýchlosťou až 300 Mb/s pre spoľahlivé Wi-Fi pripojenie Káblový LAN Ethernet port Plug-n-Surf! Jednoduché nastavenie a používanie.
7337 Kč
cena s DPH
ACER Router Connect Enduro M6E PN: FF.G2VTA.001
Technické specifikace
Kategorie: Router
Typ: Mediatek Octa Core Cortex A78/A55
Barva: Bílá
Display: dotykový, 2.4"
Rozměry: 8.6 cm x 14 cm x 1.9 cm
Rychlost přenosu dat: 3,27 Gb /s
Konektivita: 5G, LTE
Síť: Wifi 6, NFC
Paměť : 3GB LPDDR4X
Počet zařízení: až 32
Rozhraní: USB Type-C
SIM: NanoSIM, eSIM, SIMO
Odolnost: IP68
Baterie: 8000 mAh
Hmotnost: 0,3 kg
15627 Kč
cena s DPH
BAZAR - Cisco switch CBS350-12XT-EU - REFRESH - rozbaleno
CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu
Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci.
Záruka platná do End of Support 31. 5. 2029.
Oznámení End of Life pro CISCO CBS350
Stránky produktu: CBS350-12XT-EU
Quick start guide: Quick start guide
Switching capacity and forwarding rate (All switches are wire speed and nonblocking) Capacity in Millions of Packets per Second (mpps) (64-byte packets) 178.56
Switching Capacity in Gigabits per Second (Gbps) 240
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4,094 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols.
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets
Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for classless interdomain routing
RIP v2 Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Stacking Hardware stacking Up to 4 units in a stack. Up to 200 ports managed as a single system with hardware failover
High availability Fast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack
Plug-and-play stacking configuration/management Active/standby for resilient stack control
Autonumbering
Hot swap of units in stack
Ring and chain stacking options, auto stacking port speed, flexible stacking port options
High-speed stack interconnects Cost-effective high-speed 10G fiber interfaces.
Security ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers.
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned f...
5251 Kč
cena s DPH
Lindy Lindy 42347 Switch KVM Switch (Switch) 2x HDMI, USB typu C, USB 2.0 a 2-port zvuk
12632 Kč
cena s DPH
Switch, 8x 10G LAN, 2x SFP+, PoE++ 60W/port, 155W budget, UniFi správa, desktop/wallmount.
4617 Kč
cena s DPH
TP-Link OMADA EAP650 D120-Outdoor
AX3000 Vnitřní/venkovní přístupový bod Wi-Fi 6
Vynikající rychlost Wi-Fi 6 : 2402 Mb/s na frekvenci 5 GHz a 574 Mb/s na frekvenci 2,4 GHz.
Směrové pokrytí ultra-rozsahem : Vybaveno vestavěnými směrovými anténami s vysokým ziskem, které zajišťují přesné a rozšířené pokrytí.
Ideální pro sklady a venkovní scény : Vyznačuje se vodotěsným krytím IP68 s provozním rozsahem -30°C až +70°C.
802.11k/v/r Seamless Roaming : Zajišťuje nepřetržité připojení pro vozidla AGV a ruční skenery.
Flexibilní nasazení : Podporuje 802.3at PoE a technologii Omada Mesh.
Centralizovaná správa cloudu : Ovládejte vše z jediného rozhraní kdekoli prostřednictvím aplikace Omada nebo webového uživatelského rozhraní.
Stránky produktu: https://www.omadanetworks.com/cz/business-networking/omada-wifi-outdoor/eap650-d120-outdoor
Technické specifikace
HARDWARE FEATURES
Interface 1× Gigabit Ethernet Port (supports 802.3at PoE or 48V Passive PoE)
Button Reset
Power Supply • 802.3at PoE
• 48V Passive PoE
Max. Power Consumption • EU: 12.5W (802.3at PoE or Passive PoE)
• US: 14.7W (802.3at PoE or Passive PoE)
Dimensions ( W x D x H ) 8.2 × 2.3 × 9.1 in (207.5 × 58 × 230 mm)
Antenna Built-in Directional Antennas:
• 2.4 GHz: 2× 8 dBi
• 5 GHz: 2× 10 dBi
Beamwidth: 120° Horizontal; 30° Vertical
Bluetooth Yes
Weatherproof Enclosure IP68
Mounting Optional bracket accessory APM-100:
Supports vertical ±45° , horizontal ±45° adjustment
Note: Optional bracket accessories need to be purchased separately
WIRELESS FEATURES
Coverage • 2.4 GHz: 200+ m*
• 5 GHz: 500+ m*
Concurrent Clients 250+**
Wireless Standards IEEE 802.11 a/b/g/n/ac/ax
Frequency 2.4 GHz, 5 GHz
Signal Rate 574 Mbps (2.4 GHz) + 2402 Mbps (5 GHz)†
Wireless Functions • 1024-QAM
• DL/UL OFDMA
• Multiple SSIDs (Up to 16 SSIDs, 8 on each band)
• Enable/Disable Wireless Radio
• Enable/Disable SSID Broadcast
• Guest Network
• Automatic Channel Assignment
• Transmit Power Control (Adjust Transmit Power on dBm)
• QoS (WMM)
• 2 × 2 (2.4 GHz & 5 GHz) DL/UL MU-MIMO
• Omada Mesh§
• Seamless Roaming(802.11k/v/r)§
• Band Steering
• Load Balance
• Airtime Fairness
• Beamforming
• RADIUS Accounting
• MAC Authentication
• Reboot Schedule
• Wireless Schedule
• Wireless Statistics
• Static IP/Dynamic IP
Wireless Security • Captive Portal Authentication§
• Access Control
• Wireless Mac Address Filtering
• Wireless Isolation Between Clients
• SSID to VLAN Mapping
• Rogue AP Detection
• 802.1X Support
• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Transmission Power • CE: < 20 dBm (2.4GHz, EIRP); < 23dBm (5 GHz, band1 & band 2, EIRP);< 30 dBm (5 GHz,band 3, EIRP);
• FCC: < 30 dBm (2.4 GHz); < 30 dBm (5 GHz)
Management Features
Omada App Yes
Restore & Backup Yes
NTP Yes
Centralized Management • Omada Hardware Controller
• Omada Software Controller
• Omada Cloud-based Controller
• Omada APP
Cloud Access Yes. Require the use of an Omada controller.
Email Alerts Yes
LED ON/OFF Control Yes
Management MAC Access Control Yes
SNMP v1, v2c, v3
System Logging Local/Remote Syslog Yes
SSH Yes
Web-based Management Yes
Multi-site Management Yes
Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller
OTHERS
Certification CE, FCC, RoHS
Package Content • Access Point EAP650 D120-Outdoor
• Mounting Kits
• Installation Guide
System Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows11, Linux
Environment • Operating Temperature: -30–70 ? (-22–158 ?)
• Storage Temperature: -40–70 ? (-40–158 ?)
• Operating Humidity: 10–90% RH non-condensing
• Storage Humidity: 5–90% RH non-condensing
593 Kč
cena s DPH
TP-Link OMADA ISM311LM
1000Base-SX MM průmyslový SFP modul
ISM311LM je průmyslový modul SFP určený k prodloužení přenosové vzdálenosti. Po připojení k našim průmyslovým přepínačům může ISM311LM prodloužit vzdálenost až na 550 m. Uživatelé si mohou vybrat, zda a které položky budou optické moduly používat podle potřeby, aby snížili náklady.
Multi-mode SFP LC transceiver
Podporuje digitální diagnostické monitorování (DDM)
Kompatibilní dle Small Form Pluggable Multi-Source Agreement (SFP-MSA)
Hot-Pluggable s maximální flexibilitou
Provozní teploty pro průmyslové prostředí : -40°C až 85°C
Stránky produktu:
https://www.omadanetworks.com/cz/business-networking/omada-accessory-module-cable/ism311lm
Technické specifikace
Transceiver
Standards and Protocols IEEE 802.3z,TCP/IP
Wave Length 850 nm
Power Supply 3.3V
Fiber Type 50/125 µm or 62.5/125 µm
Multi-mode
Max. Cable Length 550m
Data Rate 1.25 Gbps
Connector LC/UPC
Regulatory Compliance FCC, CE
Environment • Operating Temperature: -40°C~ 85°C (-40°F~ 185°F)
• Storage Temperature: -40?~85? (-40°F~ 185°F)
• Operating Humidity: 5%~85% non-condensing
• Storage Humidity: 5%~85% non-condensing
HARDWARE FEATURES
DDM Yes
SFP-MSA Yes
Hot Swappable Yes
Dimensions ( W x D x H ) 2.2*0.5* 0.4 in (56.4*13.4*11.0 mm)
Package Content
Package Content • ISM311LM
• Installation Guide
555 Kč
cena s DPH
Netgear GS305 SOHO Unmanaged Switch je funkční síťový komponent propojující zařízení anebo jiné síťové prvky. Je vhodný k řízení síťového provozu. Počet portů: 5. Přenosová rychlost LAN portů: 1 Gbit. Fyzické specifikace:Rozměry: ( šxhxv ) 101 x 94 x 29.
1786 Kč
cena s DPH
WiFi router Halo H80X (2-pack), pokrytí až 650 m2, lze připojit přes 150 zařízení, dvoupásmové připojení WiFi 6 s rychlostí až 3000 Mb/s (2402 Mb/s při 5 GHz a 574 Mb/s při 2,4 GHz), aplikace Mercusys pro snadné nastavení a správu.
222 Kč
cena s DPH
Objevte plný potenciál svého multimediálního systému Pokud hledáte spolehlivé a efektivní síťové zařízení, které vám poskytne stabilní a rychlé připojení a bezproblémový přenos dat, je náš přepínač Qoltec dokonalou volbou. Díky inovativní technologii a pevné konstrukci naše zařízení zaručuje stabil
2065 Kč
cena s DPH
TP-Link RE225BE
Dvoupásmový Wi-Fi 7 extender BE3600
Dvoupásmová Wi-Fi s rychlostí 3.6 Gb/s – 2882 Mb/s (5 GHz) + 688 Mb/s (2.4 GHz).
Kabelové připojení 2,5 Gb/s – 2× 2,5 Gb/s porty zajišťují maximální flexibilitu a zvýšenou propustnost.
Více možností montáže – Montáž na sloup, na stěnu a na stůl.
Venkovní provoz – Špičková odolnost proti prachu a vodě IP65.
Napájení po Ethernetu – Datové připojení i napájení jediným kabelem.
Kombinovaný bezdrátový a kabelový backhaul – Propojuje bezdrátový a kabelový backhaul s každou jednotkou současně, aby se zlepšila celková propustnost a snížila latence.
Multi-Link Operation (MLO) – Současné odesílání a příjem dat v různých pásmech a kanálech pro zvýšení propustnosti, snížení latence a zvýšení spolehlivosti.
Bezproblémový roaming řízený umělou inteligencí – Vytváří jednotnou síť s integrovaným roamingem řízeným umělou inteligencí a vytváří ideální řešení Wi-Fi pro vaši domácnost.
TP-Link HomeShield – Poskytuje komplexní ochranu sítě, robustní rodičovskou kontrolu a zabezpečení internetu věcí v reálném čase.
Univerzální kompatibilita – Zpětně kompatibilní se všemi generacemi WiFi a funguje s jakýmkoli poskytovatelem internetových služeb (ISP) a modemem.
Stránky produktu:
https://www.tp-link.com/cz/home-networking/range-extender/re225be
Technické specifikace
HARDWARE FEATURES
Interface 1 Gbps Ethernet Port
Button • WPS Button
• Reset Button
Input Power 100-240V~50/60Hz 0.3A
Max. Power Consumption 15W
Dimensions ( W x D x H ) 3.8 × 1.8 × 6.2 in (97 × 46 × 158 mm)
Antenna 2 External Antennas
WIRELESS FEATURES
Wireless Standards Wi-Fi 7
IEEE 802.11be/ax/ac/n/a 5 GHz
IEEE 802.11be/ax/n/b/g 2.4 GHz
Frequency • 5 GHz
• 2.4 GHz
Signal Rate • 2882 Mbps at 5 GHz
• 688 Mbps at 2.4 GHz
Working Modes Range Extender/Access Point
Reception Sensitivity 5GHz:
11be EHT20 MCS0:-96dBm
11be EHT40 MCS0:-94dBm
11be EHT80 MCS0:-91dBm
11be EHT160 MCS0:-88dBm
11be EHT20 MCS13:-59dBm
11be EHT40 MCS13:-57dBm
11be EHT80 MCS13:-54dBm
11be EHT160 MCS13:-51dBm
2.4GHz:
11be EHT20 MCS0:-95dBm
11be EHT40 MCS0:-93dBm
11be EHT20 MCS13:-58dBm
11be EHT40 MCS13:-56dBm
Wireless Security • WPA/WPA2-PSK encryptions
• WPA2/WPA3
Advanced Features • Multi-Link Operation (MLO)
• 160 MHz Channel
• 4K-QAM
• Multi-RUs
Transmission Power FCC:
• 2.4GHz < 30dBm
• 5GHz
Mesh Technology EasyMesh-Compatible
Wireless Function • LED Control
• Access Control
• Power Schedule
• Wi-Fi Coverage
OTHER
Network Services Enabled by Default Web Server
Manage and configure device through web (HTTP/HTTPS)
• Port: 80/443 Protocol: TCP
DHCP Server
IP address assignment (DHCP)
• Port: 67 Protocol: UDP
App management
Manage and configure device through app
• Port: 20001 Protocol: TCP
• Port: 20002 Protocol: UDP
OTHERS
Certification FCC, RoHS
Package Content • Wi-Fi 7 Range Extender RE235BE
• Quick Installation Guide
System Requirements Internet Explorer, Firefox, Chrome, Safari, or other
JavaScript-enabled browser
Environment • Operating Temperature: 0?~40? (32? ~104?)
• Storage Temperature: -40?~70? (-40? ~158?)
• Operating Humidity: 10%~90% non-condensing
• Storage Humidity: 5%~90% non-condensing
2099 Kč
cena s DPH
TP-Link RE235BE
Dvoupásmový Wi-Fi 7 extender BE3600
Bleskově rychlá dvoupásmová Wi-Fi 7 : 2882 Mb/s (5 GHz) + 688 Mb/s (2,4 GHz).
Multi-Link Operation (MLO) : Zvyšuje propustnost, snižuje latenci a zlepšuje spolehlivost nových aplikací.
2.5G Multigigabitvoý ethernetový port : 1× port 2,5 Gb/s zajišťuje maximální flexibilitu a zvýšenou propustnost.
Chytrý roaming : Zůstaňte připojeni nejrychlejší možnou rychlostí.
Kompatibilní s EasyMesh : Spolupracuje s routery a extendery EasyMesh a vytváří bezproblémovou Wi-Fi mesh síť pro celou domácnost, čímž zabraňuje výpadkům a zpoždění při přechodu mezi signály.
Snadné nastavení : Stisknutím tlačítka WPS nebo pomocí aplikace Tether lze snadno nastavit.
Skvělá kompatibilita : Funguje se všemi generacemi a zařízeními Wi-Fi a všemi poskytovateli internetu.
Stránky produktu:
https://www.tp-link.com/cz/home-networking/range-extender/re235be
Technické specifikace
HARDWARE FEATURES
Interface 1x 2.5 Gbps Ethernet Port
Button • WPS Button
• Reset Button
Input Power 100-240V~50/60Hz 0.3A
Max. Power Consumption 15W
Dimensions ( W x D x H ) 3.8 × 1.8 × 6.2 in (97 × 46 × 158 mm)
Antenna 2x External Antennas
WIRELESS FEATURES
Wireless Standards Wi-Fi 7
IEEE 802.11be/ax/ac/n/a 5 GHz
IEEE 802.11be/ax/n/b/g 2.4 GHz
Frequency • 5 GHz
• 2.4 GHz
Signal Rate • 2882 Mbps at 5 GHz
• 688 Mbps at 2.4 GHz
Working Modes Range Extender/Access Point
Reception Sensitivity 5GHz:
11be EHT20 MCS0:-96dBm
11be EHT40 MCS0:-94dBm
11be EHT80 MCS0:-91dBm
11be EHT160 MCS0:-88dBm
11be EHT20 MCS13:-59dBm
11be EHT40 MCS13:-57dBm
11be EHT80 MCS13:-54dBm
11be EHT160 MCS13:-51dBm
2.4GHz:
11be EHT20 MCS0:-95dBm
11be EHT40 MCS0:-93dBm
11be EHT20 MCS13:-58dBm
11be EHT40 MCS13:-56dBm
Wireless Security • WPA/WPA2-PSK encryptions
• WPA2/WPA3
Advanced Features • Multi-Link Operation (MLO)
• 160 MHz Channel
• 4K-QAM
• Multi-RUs
Transmission Power FCC:
• 2.4GHz < 30dBm
• 5GHz
Mesh Technology EasyMesh-Compatible
Wireless Function • LED Control
• Access Control
• Power Schedule
• Wi-Fi Coverage
OTHER
Network Services Enabled by Default Web Server
Manage and configure device through web (HTTP/HTTPS)
• Port: 80/443 Protocol: TCP
DHCP Server
IP address assignment (DHCP)
• Port: 67 Protocol: UDP
App management
Manage and configure device through app
• Port: 20001 Protocol: TCP
• Port: 20002 Protocol: UDP
OTHERS
Certification FCC, RoHS
Package Content • Wi-Fi 7 Range Extender RE235BE
• Quick Installation Guide
System Requirements Internet Explorer, Firefox, Chrome, Safari, or other
JavaScript-enabled browser
Environment • Operating Temperature: 0?~40? (32? ~104?)
• Storage Temperature: -40?~70? (-40? ~158?)
• Operating Humidity: 10%~90% non-condensing
• Storage Humidity: 5%~90% non-condensing
32894 Kč
cena s DPH
Netgear MR7450
1393 Kč
cena s DPH
MERCUSYS switch MS124GS
24portový gigabitový stolní/rackový switch
Plně gigabitové porty: 24× 10/100/1000 Mb/s port RJ45 s automatickým vyjednáváním podporující Auto-MDI/MDIX.
Plug & Play: Snadné použití, úspora času a námahy.
Režim izolace: Režim izolace umožňuje oddělení provozu klientů jedním kliknutím pro vyšší bezpečnost a výkon.
Prevence smyček: Sledujte a řešte problémy související se smyčkami ve struktuře sítě, abyste předešli narušením způsobeným smyčkami.
Odolný kovový kryt: Umožňuje účinný odvod tepla a dlouhou životnost sítě.
Stránky produktu: https://www.mercusys.com/cz/product/details/ms124gs
Technické specifikace
Software
Transfer Method
Store and forward
Advanced Features
802.3X Flow Control, 802.1P/DSCP QoS, Loop Prevention, Isolation
Hardware
Dimensions (W X D X H)
294*140*44mm (11.6*5.5*1.7 in)
Interfaces
24×10/100/1000Mbps RJ45 Ports, Auto-Negotiation, Auto MDI/MDIX
External Power Supply
100-240VAC, 50/60Hz
Standards and Protocols
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1p
Switching Capacity
48 Gbps
LED
Power, Link/Act, 1000Mbps
Mac Address Tabl
8K
Others
Certifications
CE, RoHS
Environment
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Storage Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Humidity: 10% to 90% non-condensing
Storage Humidity: 5% to 90% non-condensing
8320 Kč
cena s DPH
Cisco Catalyst switch C1300-16T-2G
Sada pro montáž do racku není součástí balení.
Cisco Catalyst řady 1300 jsou managovatelné switche Gigabit Ethernet Layer 3 podnikové třídy určené pro malé a střední podniky a pobočky. Tyto jednoduché, flexibilní a bezpečné switche jsou ideální pro nasazení mimo rozvodnou skříň. Řada Catalyst 1300 pracuje na přizpůsobeném softwaru operačního systému Linux s intuitivním grafickým rozhraním, který zjednodušuje nastavení sítě a pokročilými funkcemi, které urychlují digitální transformaci, zatímco všudypřítomné zabezpečení chrání kritické obchodní transakce. Přepínače řady 1300 poskytují ideální kombinaci cenové dostupnosti a možností pro malé a střední podniky a pomáhají vám vytvořit efektivnější a lépe propojenou pracovní sílu.
Stránky produktu: C1300-16T-2G
Performance Switching capacity and forwarding rate (All switches are wire-speed and nonblocking)
Capacity in millions of packets per second (mpps) (64-byte packets) 26.78
Switching capacity in gigabits per second (Gbps) 36.0
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d spanning tree support
Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default
Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported
Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4093 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs, MAC-based VLAN, protocol-based VLAN, IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1X client authentication Customer premises equipment (CPE) VLAN
Auto surveillance VLAN (ASV)
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN translation Support for VLAN one-to-one mapping, in which customer VLANs (C-VLANs) on an edge interface are mapped to service provider VLANs (S-VLANs), and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of the Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) GVRP and GARP enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link UDLD monitors physical connections to detect unidirectional links caused by incorrect
Detection (UDLD) wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks
DHCP relay at Layer 2 Relay of DHCP traffic to a DHCP server in a different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; it supports 2000 multicast groups (source-specific multicasting is also supported)
IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wire-speed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wire-speed routing of IPv6 packets
Layer 3 interface Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for CIDR
Routing Information Protocol (RIP) v2 Support for RIP v2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL)
DHCP server Switch functions as an IPv4 DHCP server, serving IP addresses for multiple DHCP pools or scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Security Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions
Supports time-based 802.1X, dynamic VLAN assignment, and MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through a web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard Prevents edge devices not in the network administrator’s control from becoming STP root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP servers
IP Source Guard (IPSG) When IPSG is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks
IP/MAC/port binding (IPMB) The preceding features (DHCP snooping, IPSG, and DAI) work together to prevent Denial-of-Service (DoS) attacks in the network, thereby increasing network availability
Secure Core Technolog
107336 Kč
cena s DPH
ZyXEL SECUEXTENDER-ZZ3Y50F; Licence ZyXEL SecuExtender pro vytvoření a zabezpečení IPSec VPN sítě. Určena je pro 50 klientů s operačním systémem Windows nebo macOS. ZÁKLADNÍ SPECIFIKACE; Typ: Licence; Délka licence: 3 roky; Kompatibilita: Windows 10 6...