KATEGORIE
Kategorie: SÍTĚ A BEZDRÁT,WIRELESS
434 Kč
cena s DPH
Držák antény na balkón s vinklem, délka 35cm
Držák na balkón pro uchycení satelitních parabol a DVBT antén - držák lze uchytit na stožár o průměru 25 - 90mm - lze použít na STA stožáry!
Technické specifikace:
Délka odsazení:
350 mm
Výška:
200 mm
Průměr trubky:
42 mm
Povrchová úprava:
galvanický zinek
Baleno:
1x hákový šroub, 2x matka M10, 2x podložka M10
Hmotnost:
1,8kg
89 Kč
cena s DPH
ALANTEC PATCH-CORD U/UTP CAT. 6A LSOH 0,5M Žlutá Alantec
2343 Kč
cena s DPH
Enermax AUQAFUSION ADV je nástupcem extrémně oblíbeného vodního chladiče AQUAFUSION all-in-one CPU. Díky patentovanému dvoukomorovému designu společnosti ENERMAX, centrálnímu vstupu chladicí kapaliny
1132 Kč
cena s DPH
RouterBOARD 5x GLAN, 1x SFP, PoE-out 500 mA/port, SwOS, správa VLAN, desktop/plast, bez ventilátoru.
19517 Kč
cena s DPH
BAZAR - Cisco switch CBS350-48FP-4G-EU - REFRESH - poškozený obal
CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu
Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci.
Záruka platná do End of Support 31. 10. 2029.
Oznámení End of Life pro CISCO CBS350
Stránky produktu: CBS350-48FP-4G-EU
Quick start guide: Quick start guide
Switching capacity and forwarding rate (All switches are wire speed and nonblocking) Capacity in Millions of Packets per Second (mpps) (64-byte packets) 77,38
Switching Capacity in Gigabits per Second (Gbps) 104
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4,094 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols.
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets
Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for classless interdomain routing
RIP v2 Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Security ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers.
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing.
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks.
IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DOS attacks in the network, thereby increasing network availability
Secure Core Technology (SCT) Makes sure...
1172 Kč
cena s DPH
Počet Gigabit-Portů: 8
Jumbo rámeček: 9K (max.)
IEEE 802.1p: ano
IEEE 802.1Q Virtual LAN (VLAN): ano
IEEE 802.3az Energy Efficient Ethernet: ano
Typ: Switch
Barva: černá
Šířka (mm): 160
Výška (mm): 29
Hloubka (mm): 95
Hmotnost (g): 350
2129 Kč
cena s DPH
Broadcom LSI internal U.3 cable 1.0 m SlimLine x8 (SFF-8654) to 1x SlimLine x8 (SFF-8654)
5345 Kč
cena s DPH
PLANET VC-231GP; PoE konvertor pro ethernet po dvouvodičovém vedení (technologie VDSL2/ADSL2+). 1× LAN RJ-45, 1× VDSL2 RJ-11, splitter pro POTS připojení. Nastavení DIP přepínači. Volitelně Master/Slave. Transparentní bridge. Dosah 1,4 km (AWG24 nebo ...
510 Kč
cena s DPH
PremiumCord Kleště krimpovací PremiumCord krimpovací kleště na průchozí RJ konektory jsou spolehlivým univerzálním nástrojem pro práci s většinou běžných modulárních zástrček řady RJ — včetně RJ11, RJ12, RJ14, RJ45 a dalších typů. Díky konstrukci 3 v 1 umožňují snadné krimpování, stříhání i odizolování kabelů, což výrazně urychluje a zpřesňuje práci při výrobě či opravách síťových a telefonních vedení. Specifikace Technické specifikace Podporované konektory Konektory RJ (RJ 11, RJ 12, RJ 14, RJ 45 ...) Funkce Krimpování, stříhání kabelů, odizolování Integrovaná zajišťovací pojistka Ano
125 Kč
cena s DPH
Na popisu produktu pracujeme a doplníme jej v nejbližší možné době. Produkt je možné zakoupit
342 Kč
cena s DPH
EVOLVEO SecuPro, bezdrátový detektor otevření oken/dveří Specifikace: Detekční vzdálenost: 25-35 mm Tamper ochrana pro případ krádeže (při snaze demontovat vysílač se aktivuje poplach) Napájení: 3 V knoflíková baterie CR2450 (součást dodávky) Výdrž baterie až 1 rok Přepínač On/Off v zadní části vysílače pro zapnutí/vypnutí senzoru Červená LED dioda signalizující otevřený okruh Měkčené samolepící podložky pro vysílač i magnet pro ochranu povrchu oken a dveří Možnost montáže pomocí 2 ks vrutů (není součástí dodávky) LED signalizace v případě slabé baterie (? 2,2 V) Proud v pohotovostním režimu: ?8 µA Proud v režimu poplachu: ?14 mA Rozměry vysílače (š × h × v): 30 × 15 × 67 mm Rozměry magnetu (š × h × v): 11 × 13,5 × 44 mm Hmotnost vysílače (bez baterie): 16 g Hmotnost magnetu: 11 g Obsah balení: Vysílač Magnet Baterie Návod k obsluze (EN/CZ/SK)
1352 Kč
cena s DPH
Router CUDY WR3000P
Počet sítí pro hosty (5 GHz): 1
Počet sítí pro hosty (2,4 GHz): 1
Připojení na síť Ethernet: Ano
Výstupní napětí: 12 V
Výstupní proud: 1,5 A
Typ zdroje: DC
Maximální spotřeba energ
82 Kč
cena s DPH
LANBERG Patch kabel CAT.6 FTP 5M zelený Fluke Passed