KATEGORIE
Kategorie: Síťové prvky aktivní
10334 Kč
cena s DPH
Sensor Chip: CMOS
Senzorový čip (palce "): 1/1.55
Efektívní rozlíšení fotek (Mio. Pixel): 62
Bluetooth: ano
WLAN: IEEE 802.11a/b/g/n/ac
Nosič dat (min.): microSD UHS-I V30
Počet slotů pro paměťové karty: 1
Max. velikost paměťové karty (GB): 256
Typ ochrany: IP68
Panorama: ano
Sériové snímání: ano
Ovládání přes aplikaci: ano
Detekce pohybu: ano
Mikrofón: ano
Max. rozlišení videa (pixel): 11136 × 5568
4k video záznam (UHD): 60fps
3D videozáznam: ne
Uhlopříčka obrazovky (cm): 4,83
Úhlopříčka obrazovky (palce "): 1.9
Kapacita aku (mAh): 1600
Závit stativu: ne
Barva: černá
Šířka (cm): 71,5
Výška (cm): 82,7
Hloubka (cm): 26,6
Hmotnost (g): 201
1011 Kč
cena s DPH
Extralink HEXON 16x 10/100/Mb/s Unmanaged L2 Fast Ethernet (10/100) Black
Omlouváme se, průběžně pracujeme na lepším popisu
12898 Kč
cena s DPH
Cisco Catalyst 9115 (C9115AXI-E); 2pásmový Wi-Fi 6 access point založen na bezdrátové technologii 2,4 GHz a 5 GHz standardu 802.11ax (zpětně kompatibilní s 802.11a/b/g/n/ac). Rychlost přenášených dat činí až 5,38 Gb/s (kombinovaná). Pro připojení je p...
6566 Kč
cena s DPH
Cisco switch CBS350-16P-2G-EU - REFRESH
CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu
Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci.
Záruka platná do End of Support 31. 10. 2029.
Oznámení End of Life pro CISCO CBS350
Stránky produktu: CBS350-16P-2G-EU
Quick start guide: Quick start guide
Switching capacity and forwarding rate (All switches are wire speed and nonblocking) Capacity in Millions of Packets per Second (mpps) (64-byte packets) 26,78
Switching Capacity in Gigabits per Second (Gbps) 36
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4,094 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols.
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets
Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for classless interdomain routing
RIP v2 Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Security ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers.
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing.
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks.
IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DOS attacks in the network, thereby increasing network availability
Secure Core Technology (SCT) Makes sure that the switch will r
312 Kč
cena s DPH
GEMBIRD NCAC-1F5E-01 CAT5E FTP single port surface mount box
143 Kč
cena s DPH
Dlouhý montážní plech TP-Link je určený pro připevnění switche do rozvaděče. Je vhodný pro TL-SG1024G. Cena je uvedena za jeden kus.
4562 Kč
cena s DPH
MikroTik LtAP LTE6 kit
vysoce výkonný přístupový bod LTE s podporou GPS
Sada LtAP LTE6 je kom...
3198 Kč
cena s DPH
Cisco Unified SIP Phone 3905 (určeno pro Cisco UC Manager)
19882 Kč
cena s DPH
Cisco switch CBS350-48P-4X-EU - REFRESH
CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu
Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci.
Záruka platná do End of Support 31. 10. 2029.
Oznámení End of Life pro CISCO CBS350
Stránky produktu: CBS350-48P-4X-EU
Quick start guide: Quick start guide
Switching capacity and forwarding rate (All switches are wire speed and nonblocking) Capacity in Millions of Packets per Second (mpps) (64-byte packets) 130,94
Switching Capacity in Gigabits per Second (Gbps) 176
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4,094 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols.
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets
Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for classless interdomain routing
RIP v2 Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Stacking Hardware stacking Up to 4 units in a stack. Up to 200 ports managed as a single system with hardware failover
High availability Fast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack
Plug-and-play stacking configuration/management Active/standby for resilient stack control
Autonumbering
Hot swap of units in stack
Ring and chain stacking options, auto stacking port speed, flexible stacking port options
High-speed stack interconnects Cost-effective high-speed 10G fiber interfaces.
Security ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers.
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP s
796 Kč
cena s DPH
Router DAHUA AC12
Omlouváme se, průběžně pracujeme na lepším popisu
2218 Kč
cena s DPH
MikroTik RBD53iG-5HacD2HnD, hAP ac3
MikroTik vytvořil jedinečný a cenově dostupný domácí accesspoint, který disponuje všemi funkcemi, které byste mohli v následujících letech potřebovat.
Funkční, vkusný, univerzální
S celkem pěti Gigabitovými ethernety , 256MB RAM a čtyřjádrovým procesorem může hAP ac3 uspokojit i velké a náročné domácnosti . K dispozici je standardní USB port pro možnost rozšíření úložiště. Díky inovativnímu držáku lze zařízení připevnit vertikálně i horizontálně. Sada pro uchycení na zeď je také součástí balení.
Spolehlivá konektivita pro všechna Vaše zařízení
Silná dual-chain bezdrátová část 2.4/5 GHz vyřeší většinu problémů s rušením od okolních sítí. Dual-band zařízení je v dnešní době již nutností. Pro starší zařízení můžete využít 2.4GHz a pro všechna ostatní pak 5GHz, kde není míra rušení tak vysoká a je zde daleko větší prostor pro využití rychlého připojení do sítě Internet nebo sdílení v domácí síti.
Obsah balení
Zařízení
(2) Anténa
Napájecí adaptér 24V / 1.5A
Držák / podstavec
Šroubky pro přidělání na zeď
Technické specifikace:
Bezdrátové vlastnosti
Bezdrátové frekvence: 2.4 + 5 GHz (dual band)
WiFi standardy: 802.11ac, 802.11n, 802.11a, 802.11b/g
Přenosová rychlost WiFi - 2.4GHz [Mb/s]: 300
Přenosová rychlost WiFi - 5GHz [Mb/s]: 866
Vysílací výkon 2.4GHz [dBm]: 25
Vysílací výkon 5GHz [dBm]: 26
2.4GHz MIMO: 2 x 2
5GHz MIMO: 2 x 2
Typ antény: Odnímatelná
Zisk antény [dBi]: 5
Fyzické charakteristiky
Provedení: Desktop
Použití: Vnitřní
Tlačítka: Reset, mód
Provozní teplota [°C]: -40 až 70
Hloubka [mm]: 129
Šířka [mm]: 251
Výška [mm]: 39
Hardware
RAM [MB]: 256
CPU: IPQ-4019
Frekvence CPU [MHz]: 716
Počet CPU jader: 4
Velikost interního uložiště [MB]: 128
Konektory a rozhraní
VF konektory: (2) RSMA female
Rychlosti LAN: (5) 10/100/1000Mbps
Gigabit LAN: Ano
USB: Ano
Napájení
Napájení přes PoE: 18 .. 28V DC
Typy PoE: PoE-Out + PoE-In
Počet PoE Out portů: 1
PoE budget [W]: 18
Max. spotřeba energie [W]: 12
Napájení přes konektor/svorkovnici: 12 .. 28V DC
Software
Operační systém: RouterOS - L4
Podpora IPv6: Ano
Výchozí IP adresa: 192.168.88.1
Výchozí jméno a heslo: admin / -
Užitečné odkazy:
Datasheet
Diagnostika vadné jednotky
Jak se bránit ESD
veškeré informace o produktech společnosti MikroTik
aktuální verze RouterOS ke stažení
aktuální verze WinBoxu
výpočet parametrů bezdrátového spoje
931 Kč
cena s DPH
Voděodolná USB inspekční endoskopická kamera k mobilu 7mm, délka kabelu 10m s vysokým rozlišením,...
121 Kč
cena s DPH
Napájecí 12 V / 12 W zdroj vhodný pro napájení některých AP a RouterBoardů. Obzvláště vhodné k TP-LINK TL-WA5210G.
3090 Kč
cena s DPH
1 na 8 HDMI™ Splitter Full 3D a 4K60Hz Club 3D CSV-1383 je vysoce výkonný a malý 1 až 8 HDMI™ Ultra High Definition Splitter s hot plug a železným pouzdrem. Distribuuje vstup signálu HDMI™ do osmi identických výstupů současně. Poskytuje vysoce výkonný audio a video výstup prostřednictvím kabelů HDMI™ až do rozlišení 4K@60Hz a je schopen přijímat a přenášet šířku pásma až 6Gbps/600MHz. Jedná se o vysoce výkonný a malý rozbočovač HDMI™ v kovovém pouzdře s externím napájecím zdrojem 100-240VAC / 5V-3A DC, spotřeba energie (max.) 11,3 Watt. Je to ideální pomocník jak doma, tak v práci. Specifikace Technické Specifikace Vstup 1x HDMI™ Female Výstup 8x HDMI™ Female Operační systém Windows10/11 Rozměry a váha Rozměry 258 x 113,5 x 35 mm Váha 770 g Co je v krabici Napájení 100-240VAC/ 5V3A DC
1829 Kč
cena s DPH
Cooler Master Masterliquid 240 Atmos Cooler Master odhaluje novou generaci techniky chlazení kapalin s MasterLiquid 240 Atmos, naším novým kapalinovým chladičem AIO. Se sérií Atmos představujeme množství moderních designů a funkcí. Naše charakteristická dvoukomorová pumpa byla vylepšena pro lepší synergii chlazení. Nejnovější ventilátory SickleFlow Edge ARGB jsou součástí dodávky pro tiché zlepšení proudění vzduchu a jsou předinstalované pro zjednodušení instalace a celkového uživatelského zážitku. Kryt pumpy je vyroben z ekologických recyklovaných plastů a je vybaven průhledným odnímatelným horním krytem, který si můžete přizpůsobit vlastním logem nebo odznakem. Atmos podporuje Addressable Gen 2 RGB pro nejuniverzálnější a nejživější osvětlení, kompatibilní s naším softwarem MasterPlus a MasterControl. Cooler Master skáče do budoucnosti se sérií Atmos. Rafinovaný dvoukomorový design Naše charakteristická dvoukomorová pumpa byla vylepšena pro lepší synergii chlazení Přizpůsobitelný vrchní kryt pumpy Odnímatelný horní kryt pumpy, přizpůsobitelný pomocí vlastních 3D tištěných návrhů ARGB Gen 2 Osvětlení nové generace s adresovatelným Gen 2 RGB, kompatibilní s MasterPlus i MasterControl Specifikace Pumpa Rozměr pumpy 84,9 x 81 x 53,15 mm Konektor 4-pin Chladič Rozměr radiátoru 277 x 119,6 x 27,2 mm Materiál radiátoru Hliník Počet ventilátorů 2x Ventilátor Velikost 120 mm Rychlost 690 ~2500 RPM ± 10% Statický tlak 3,61 mm H20 Proud vzduchu 70,7 CFM Hluk 27,2 dB(A) Konektory 4-pin (Ventilátor) Barva LED ARGB Typ ložiska Loop dynamic bearing MTBF 210 000 hodin Kompatibilita Intel LGA 1700 / 1200 / 1151 / 1150 / 1155 / 1156 AMD AM5 / AM4