KATEGORIE
Kategorie: Síťové prvky aktivní
2509 Kč
cena s DPH
VISION HDMI-over-IP Receiver - LIFETIME WARRANTY
447 Kč
cena s DPH
Síťová karta Digitus DN-1011-1/A-DN-1011-1
1821 Kč
cena s DPH
Dahua IPC-C2KP – pokročilá detekce, všestranná instalace IP síťová kamera Dahua IPC-C2KP zachycuje obraz v ostrém a detailním rozlišení a je ideálním řešením pro monitoring vnitřního prostoru, a to jak ve dne, tak v noci. Disponuje celou řadou funk...
421 Kč
cena s DPH
Dahua PFA152-E; Držák pro montáž kamer na sloup/trubku, zatížitelnost 3 kg. Použitelné na trubku průměru 80 až 150 mm. Pro přehled držáků a upevnění klikněte...
622 Kč
cena s DPH
Kabelový naviják Brennenstuhl Akyga® AK-CR-01 je spolehlivé řešení pro ukládání a organizaci kabe...
2214 Kč
cena s DPH
Díky implementaci RB911 do stávající sektorové antény typu mANT vznikla nová vysílací jednotka určená pro ISP providery, ideální pro připojení klientů na delší vzdálenosti.
Uvnitř sektorové antény se nachází velmi výkonný RB911G-2HPnD s taktem 600MHz, 64
1113 Kč
cena s DPH
TP-Link Archer TXE70UH
Bezdrátový USB adaptér Wi-Fi 6E s vysokým ziskem
Světelně rychlá Wi-Fi 6E - Rychlost bez přetížení až 2402 Mb/s (6 GHz) + 2402 Mb/s (5 GHz) + 574 Mb/s (2,4 GHz).
Třípásmové bezdrátové připojení - Pásma 2,4 GHz, 5 GHz a 6 GHz pro flexibilní připojení.
Širší pokrytí - Připojte se k Wi-Fi z libovolného místa v domácnosti díky anténám s vysokým ziskem a technologii Beamforming.
Nižší zpoždění při hraní her - OFDMA a MU-MIMO zajišťují nejefektivnější připojení Wi-Fi pro váš počítač.
Bluetooth 5.3 Zlepšení bezpečnosti a spolehlivosti proti Bluetooth 5.2 poslední generace
Vylepšené zabezpečení - WPA3 poskytuje nejnovější vylepšení zabezpečení pro ochranu osobních hesel.
Super rychlé USB 3.0 - Až 10x vyšší přenosová rychlost než u USB 2.0
Stránky produktu: https://www.tp-link.com/cz/home-networking/high-gain-adapter/archer-txe70uh/
Technické specifikace
HARDWARE FEATURES
LED Status
Dimensions ( W x D x H ) 30.5 × 14.8 × 111.7 mm (1.2 × 0.58 × 4.4 in)
Antenna 2× High-Gain Tri-Band Antennas
WIRELESS FEATURES
Wireless Standards IEEE 802.11a/b/g/n/ac/ax
Signal Rate 6GHz:
11ax: Up to 2402 Mbps(dynamic)
5 GHz:
11ax: Up to 2402 Mbps(dynamic)
11ac: Up to 1732 Mbps(dynamic)
11n: Up to 400 Mbps(dynamic)
11a: Up to 54 Mbps(dynamic)
2.4 GHz:
11ax: Up to 574 Mbps(dynamic)
11n: Up to 400 Mbps(dynamic)
11g: Up to 54 Mbps(dynamic)
11b: Up to 11 Mbps(dynamic)
Wireless Modes Infrastructure mode
Wireless Security WEP, WPA/WPA2/WPA3, WPA-PSK/WPA2-PSK
Transmission Power 6 GHz: 16 dBm(FCC)
5 GHz: 15 dBm(FCC)
2.4 GHz : 15 dBm(FCC)
OTHERS
Certification FCC, CE, RoHS
Package Content AXE5400 Wi-Fi 6E High Gain Wireless USB Adapter Archer TXE70UH
Quick Installation Guide
USB 3.0 Cradle
System Requirements Supported operating systems include Windows 10, 11
Environment Operating Temperature: 0?~40? (32? ~104?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Accessories Specifications Extension Cable Length: 1.2 m
13960 Kč
cena s DPH
MikroTik CloudRouterSwitch CRS312-4C+8XG-RM
CRS317-1G-16S+RM je zcela nový Cloud Router Switch s L3 funkcemi s montáží do 19" racku. Switch je vybaven 16x SFP+ porty s rychlostí 10Gbps se zpětnou kompatibilitou i pro 1Gbps moduly, dále gigabitovým ethernetovým portem pro management a jedním sériovým portem.
CRS317-1G-16S+RM je poháněn novou generací chipů , která dává dostatečně vysoký výkon pro všech šestnáct 10G portů při použití s kteroukoliv velikostí Ethernetových rámců. Nové funkce jako hadwarový spanning-tree protokol nebo Link Aggregation (LACP) poskytnou vaší síti dostatečnou ochranu, spolehlivost a zvýší úroveň na opravdu profesionální úroveň.
Switch má kromě 2 napájecích plně redundantních zdrojů také velké pasivní chlazení, kterému v případě teplého prostředí vypomůže dvojice ventilátorů.
Klíčové vlastnosti
Volba operačního systému - RouterOS nebo SwOS
Non-blocking Layer 2 switching capacity
16K host table
IEEE 802.1Q VLAN
Až 4K simultaneous VLAN
Port isolation and Port security
MSTP
HW MPLS forwarding coming in future software update
Podpora SFP 1.25 a SFP+ 10Gbit modulů
800 MHz dual core CPU
Dvojice napájecích zdrojů
Broadcast storm control
Port mirroring of ingress/egress traffic
Rapid Spanning Tree Protocol (RSTP)
Link Aggregation (LACP)
Access Control List
MikroTik neighbour discovery
SNMP v2/v3
Rackmount and tabletop
Velké teplotní rozpětí -20 až +60 C
Pasivní chlazení s dvěma záložními ventilátory
Obsah balení
Zařízení
Úchyty do racku
(2) Napájecí kabel
Technické specifikace:
CPU
800MHz
Typ CPU
98DX8216B0
RAM
1GB
Počet LAN portů
1
Gigabitové porty
Ano (1)
SFP+ porty
Ano (16)
Počet Mini-PCI
0
Integr. bezdrátová karta
Ne
Podpora 802.3af
Ne
PoE
Ne
Senzor napětí
Ne
Senzor teploty CPU
Ano
Senzor teploty PCB
Ne
Rozměry
443 x 224 x 44 mm
Operační systém
RouterOS
Rozsah pracovních teplot
-40C až 70C
Licence
L6
Užitečné odkazy:
Diagnostika vadné jednotky
Jak se bránit ESD
veškeré informace o produktech společnosti MikroTik
aktuální verze RouterOS ke stažení
aktuální verze WinBoxu
výpočet parametrů bezdrátového spoje
62939 Kč
cena s DPH
AXIS V5925 50 HZ
962 Kč
cena s DPH
Dahua IPC-H3AP-0360B – kompaktní řešení pro monitoring interiéru IP kamera Dahua IPC-H3AP-0360B v kompaktním provedení, která je určena do vnitřních prostor – kanceláře, malého obchodu nebo domácnosti. Snímač CMOS podporuje čistý obraz a ve spojení...
133432 Kč
cena s DPH
Přepínače Cisco® Catalyst® 9300 Series jsou přední stohovatelnou podnikovou přepínací platformou ...
22140 Kč
cena s DPH
Cisco switch CBS350-24NGP-4X-EU - REFRESH
CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu
Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci.
Záruka platná do End of Support 31. 10. 2029.
Oznámení End of Life pro CISCO CBS350
Stránky produktu: CBS350-24NGP-4X-EU
Quick start guide: Quick start guide
Switching capacity and forwarding rate (All switches are wire speed and nonblocking) Capacity in Millions of Packets per Second (mpps) (64-byte packets) 142,85
Switching Capacity in Gigabits per Second (Gbps) 192
Layer 2 switching Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Up to 8 groups
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN Support for up to 4,094 VLANs simultaneously
Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN
Management VLAN
Private VLAN with promiscuous, isolated, and community port
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks
Guest VLAN, unauthenticated VLAN
Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication
CPE VLAN
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices
Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR)
VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN
Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers
Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs
Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag
Layer 2 protocol tunneling over Q-in-Q is also supported
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols.
Head-of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Layer 3 IPv4 routing Wirespeed routing of IPv4 packets
Up to 990 static routes and up to 128 IP interfaces
IPv6 routing Wirespeed routing of IPv6 packets
Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for classless interdomain routing
RIP v2 Support for Routing Information Protocol version 2 for dynamic routing
Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL)
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes
Support for DHCP options
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets
Stacking Hardware stacking Up to 4 units in a stack. Up to 200 ports managed as a single system with hardware failover
High availability Fast stack failover delivers minimal traffic loss. Support link aggregation across multiple units in a stack
Plug-and-play stacking configuration/management Active/standby for resilient stack control
Autonumbering
Hot swap of units in stack
Ring and chain stacking options, auto stacking port speed, flexible stacking port options
High-speed stack interconnects Cost-effective high-speed 10G fiber interfaces.
Security ecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions
Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication
IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms)
Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers.
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DH
2255 Kč
cena s DPH
PG1200 KIT od značky TP-Link je nová generace adaptéru Powerline. Protokol G.hn zajišťuje vysokou rychlost, stabilitu a větší kapacitu. Najdete na něm Gigabitový ethernetový port, který oceníte při streamování v rozlišení 8K a hraní bez zpoždění. Stačí po
11776 Kč
cena s DPH
GS728TP je gigabitový PoE/ PoE+ inteligentní přepínač, který je vybaven funkcí PoE na všech portech a podporuje PoE+ s výkonovým rozpočtem až 30 W na prvních 8 portech, což zajišťuje ochranu investic